At Tue, 08 Dec 2009 14:02:43 +0100,
Alexey Fisher wrote:
>
> Am Dienstag, den 08.12.2009, 12:04 +0100 schrieb Takashi Iwai:
> > At Sun, 6 Dec 2009 11:29:13 +0100,
> > Alexey Fisher wrote:
> > >
> > > This patch introduce pin config and some workarounds for dg45id board.
> > > Currently tested Mic + Surround 7.1 on rear panel, and Mic + HP on front panel.
> > > SPDIF front and SPDIF rear are untested.
> > > Both Mics provide VREF_80 (4,05 V) in mic mode and no VREF in line-in mode.
> > >
> > > Signed-off-by: Alexey Fisher <bug-track@xxxxxxxxxxxxxxxxx>
> >
> > Thanks for the patch.
> >
> > But, I still don't see the reason for so many init verbs, especially
> > doing static routings. Can't be they connected properly by the
> > parser? If so, it's the parser to be fixed, not a quirky init table.
>
> Ok. I prefer to have the part with mixer. The driver currently can't
> handle this.
What do you mean exactly with "mixer"?
> It seems to make some problem with front HP. By default All
> mixer inputs use 0x0a (Front HP out), in this situation i get hi freq
> noise on 0x0a. So or driver should learn to work with mixer or...?
Not sure what you are talking about here...
> > And, your machine has really no headphone detection? I mean, not
> > about your taste but it's not physically doable?
>
> HP detection working on rear green (0x0d), not on front green (0x0a).
> May be there is something wrong with connector. Anyway, it working fine
> under M$. May be we should provide UI control for this (to make user
> completely confused:)?
If Windows driver can detect the front HP jack, it means the
connection is alive. You can try hda-verb to check whether the
pin-detection works, independently from the driver setup.
thanks,
Takashi
> > thanks,
> >
> > Takashi
> >
> > >
> > > modified: sound/pci/hda/patch_sigmatel.c
> > > ---
> > > sound/pci/hda/patch_sigmatel.c | 53 +++++++++++++++++++++++++++++++++++++++-
> > > 1 files changed, 52 insertions(+), 1 deletions(-)
> > >
> > > diff --git a/sound/pci/hda/patch_sigmatel.c b/sound/pci/hda/patch_sigmatel.c
> > > index 6b0bc04..e604bae 100644
> > > --- a/sound/pci/hda/patch_sigmatel.c
> > > +++ b/sound/pci/hda/patch_sigmatel.c
> > > @@ -860,6 +860,37 @@ static struct hda_verb dell_eq_core_init[] = {
> > > {}
> > > };
> > >
> > > +static struct hda_verb intel_dg45id_init[] = {
> > > + /* connect all inputs to the mixer */
> > > + /* 0x0b -> mixer */
> > > + { 0x28, AC_VERB_SET_CONNECT_SEL, 0x01},
> > > + /* 0x0e -> mixer */
> > > + { 0x29, AC_VERB_SET_CONNECT_SEL, 0x01},
> > > + /* FIXME: if sorround51 0x0c can be used for line-in
> > > + * currently do not working */
> > > + { 0x2a, AC_VERB_SET_CONNECT_SEL, 0x01},
> > > +
> > > + /* connect mixer to the switch */
> > > + { 0x20, AC_VERB_SET_CONNECT_SEL, 0x0b},
> > > +
> > > + /* unmute inputs on mixer */
> > > + { 0x1d, AC_VERB_SET_AMP_GAIN_MUTE, 0x7017},
> > > + { 0x1d, AC_VERB_SET_AMP_GAIN_MUTE, 0x7117},
> > > + /* TODO: make option for 0x0c to be line-in
> > > + * { 0x1d, AC_VERB_SET_AMP_GAIN_MUTE, 0x7217}, */
>
> This part is not really important. I used this to copy settings of M$
> driver. Thirst two, are correctly set by BIOS, second two are switched.
>
>
> > > + /* extra check all DACs */
> > > + /* 0x18 -> 0x0c */
> > > + { 0x0c, AC_VERB_SET_CONNECT_SEL, 0x03},
> > > + /* 0x15 -> 0x0d */
> > > + { 0x0d, AC_VERB_SET_CONNECT_SEL, 0x00},
> > > + /* 0x16 -> 0x0f */
> > > + { 0x0f, AC_VERB_SET_CONNECT_SEL, 0x02},
> > > + /* 0x17 -> 0x10 */
> > > + { 0x10, AC_VERB_SET_CONNECT_SEL, 0x01},
> > > + {}
> > > +};
> > > +
> > > static struct hda_verb stac92hd73xx_core_init[] = {
> > > /* set master volume and direct control */
> > > { 0x1f, AC_VERB_SET_VOLUME_KNOB_CONTROL, 0xff},
> > > @@ -1531,6 +1562,19 @@ static unsigned int dell_m6_pin_configs[13] = {
> > > 0x4f0000f0,
> > > };
>
> The comment is not up to date any more. HP is working now.
> You said about wrong pincfgs. What you mean should be changed here to
> make difference between speaker and jack?
>
> PS: up now, i trawling and not able to test this PC for about 6 months.
> So if you doubt, we can leave this patch till juli.
>
> > > +/* TODO: _config[1] (PIN 0x0a) still do not working (Front panel speaker/hp),
> > > + * $.ini provide some variants of this pin: 0x02214230, 0x0221421F, 0x0211421F.
> > > + * Def. and Seq. should make difference.
> > > + * Same for _config[4] (0x0d): wariants 0x01114210, 0x0121421f -should be
> > > + * some hove in sync with 0x0a? _config[3] (0x0c) can be switched to line-in
> > > + * wariant 0x0181325e. */
> > > +static unsigned int intel_dg45id_pin_configs[14] = {
> > > + 0x02214230, 0x02A19240, 0x01113214, 0x01114210,
> > > + 0x01A19250, 0x01111212, 0x01116211, 0x40f000f0,
> > > + 0x40f000f0, 0x40f000f0, 0x40f000f0, 0x014510A0,
> > > + 0x074510B0, 0x40f000f0
> > > +};
> > > +
> > > static unsigned int alienware_m17x_pin_configs[13] = {
> > > 0x0321101f, 0x0321101f, 0x03a11020, 0x03014020,
> > > 0x90170110, 0x4f0000f0, 0x4f0000f0, 0x4f0000f0,
> > > @@ -1544,6 +1588,7 @@ static unsigned int *stac92hd73xx_brd_tbl[STAC_92HD73XX_MODELS] = {
> > > [STAC_DELL_M6_DMIC] = dell_m6_pin_configs,
> > > [STAC_DELL_M6_BOTH] = dell_m6_pin_configs,
> > > [STAC_DELL_EQ] = dell_m6_pin_configs,
> > > + [STAC_92HD73XX_INTEL] = intel_dg45id_pin_configs,
> > > [STAC_ALIENWARE_M17X] = alienware_m17x_pin_configs,
> > > };
> > >
> > > @@ -5127,6 +5172,11 @@ again:
> > > break;
> > > }
> > > break;
> > > + case STAC_92HD73XX_INTEL:
> > > + spec->init = intel_dg45id_init;
> > > + spec->num_dmics = STAC92HD73XX_NUM_DMICS;
> > > + spec->num_smuxes = ARRAY_SIZE(stac92hd73xx_smux_nids);
> > > + break;
> > > case STAC_ALIENWARE_M17X:
> > > spec->num_dmics = STAC92HD73XX_NUM_DMICS;
> > > spec->num_smuxes = ARRAY_SIZE(stac92hd73xx_smux_nids);
> > > @@ -5164,7 +5214,8 @@ again:
> > > return err;
> > > }
> > >
> > > - if (spec->board_config == STAC_92HD73XX_NO_JD)
> > > + if (spec->board_config == STAC_92HD73XX_NO_JD ||
> > > + spec->board_config == STAC_92HD73XX_INTEL)
> > > spec->hp_detect = 0;
> > >
> > > codec->patch_ops = stac92xx_patch_ops;
> > >
>
>
_______________________________________________
Alsa-devel mailing list
Alsa-devel@xxxxxxxxxxxxxxxx
http://mailman.alsa-project.org/mailman/listinfo/alsa-devel
