On Mon, Nov 30, 2009 at 02:13:47PM +0100, javier Martin wrote:
> 2009/11/30 Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
>
> > On Mon, Nov 30, 2009 at 11:43:23AM +0100, javier Martin wrote:
> > > Hi Sascha,
> > > have you tested capture direction on an i.MX27 based board?
> > >
> > > I have been testing your patches in the place you suggested and playback
> > > seems to work fine but I have several problems with capture stream. I
> > found
> > > a BUG in the audmux_v1 code
> > > and I have fixed it but I am still having problems with capture. The file
> > > keeps empty and nothing is recorded.
> >
> > Capture works fine on my boards.
> >
> >
> >
> > > Please could you try the following on an i.MX27 based board?
> > >
> > > arecord -t raw -c 1 -f S16_LE test.wav
> >
> > Does it work with two channels? Do you use DMA or FIQ? Could you try the
> > other variant?
> >
>
> Unfortunately, I can't test it using two channels because our board has a
> wm8974 mono codec. Please could you point me how can I change between FIQ
> and DMA? I thought FIQ was only for AC97,
It's around line 662:
if ((cpu_is_mx27() || cpu_is_mx21()) &&
!(ssi->flags & IMX_SSI_USE_AC97)) {
ssi->flags |= IMX_SSI_DMA;
platform = imx_ssi_dma_mx2_init(pdev, ssi);
} else
platform = imx_ssi_fiq_init(pdev, ssi);
Just make sure IMX_SSI_DMA is cleared and imx_ssi_fiq_init() is called.
Sascha
--
Pengutronix e.K. | |
Industrial Linux Solutions | http://www.pengutronix.de/ |
Peiner Str. 6-8, 31137 Hildesheim, Germany | Phone: +49-5121-206917-0 |
Amtsgericht Hildesheim, HRA 2686 | Fax: +49-5121-206917-5555 |
_______________________________________________
Alsa-devel mailing list
Alsa-devel@xxxxxxxxxxxxxxxx
http://mailman.alsa-project.org/mailman/listinfo/alsa-devel
