Tony Vroon wrote:
> After the success of the Xonar D2X in my system, I decided to upgrade to
> an Essence ST (of the PCI variety, no D6 daughterboard). Unfortunately
> it seems that it produces no audio for me over the headphone port (the
> reason I bought this card) or the front-panel headphone port.
>
> # cat /proc/asound/ST/cmi8788
> 60: 19 01 00 09 19 01 00 09 00 00 00 00 00 00 00 00
^^^^^
The first ST driver did not work. This will be fixed in ALSA 1.0.22
or in the 2.6.33 kernel; try the daily snapshot:
http://ftp.kernel.org/pub/linux/kernel/people/tiwai/alsa/alsa-driver/
> I'm wondering if the Essence ST driver was written based on an a ST+D6
> engineering sample as mine is the ST (no D6) retail box. Is it possible
> that the hardware is different?
The base board of the ST and ST+H6 are identical. However, I wrote the
driver without any hardware at all, so I overlooked the CS2000 chip
which needs to be initialized.
HTH
Clemens
_______________________________________________
Alsa-devel mailing list
Alsa-devel@xxxxxxxxxxxxxxxx
http://mailman.alsa-project.org/mailman/listinfo/alsa-devel
