Hi
On Fri, 13 Nov 2009 12:02:03 -0600
Jane Wang <jwang@xxxxxx> wrote:
> Reconfigure DMA transfer parameters to resume audio after system comming out of OFF state.
>
> Signed-off-by: Jane Wang <jwang@xxxxxx>
> ---
> sound/soc/omap/omap-pcm.c | 7 ++++++-
> 1 files changed, 6 insertions(+), 1 deletions(-)
>
> diff --git a/sound/soc/omap/omap-pcm.c b/sound/soc/omap/omap-pcm.c
> index 6a829ee..5e04390 100644
> --- a/sound/soc/omap/omap-pcm.c
> +++ b/sound/soc/omap/omap-pcm.c
> @@ -215,8 +215,13 @@ static int omap_pcm_trigger(struct snd_pcm_substream *substream, int cmd)
>
> spin_lock_irqsave(&prtd->lock, flags);
> switch (cmd) {
> - case SNDRV_PCM_TRIGGER_START:
> case SNDRV_PCM_TRIGGER_RESUME:
> + /* Reconfigure DMA transfer parameters
> + * in order to come back from OFF mode
> + */
> + omap_pcm_prepare(substream);
> + /* fall through */
Again looks simple workaround for the audio case for restoring the
DMA context but how about all other DMA clients if the low-level DMA
module expects that the clients must do the context restore?
I'm not the PM expert but I think only need for PM in omap-pcm.c or
omap-mcbsp.c would be to dealing with possible suspend/resume order not
to bring up the low-level module back alive.
--
Jarkko
_______________________________________________
Alsa-devel mailing list
Alsa-devel@xxxxxxxxxxxxxxxx
http://mailman.alsa-project.org/mailman/listinfo/alsa-devel
