At Wed, 11 Nov 2009 17:48:17 +0100, Halim Sahin wrote: > > Hello, > On Fr, Nov 06, 2009 at 03:39:29 +0100, Takashi Iwai wrote: > > > 2. hdmi output isn't active in the alsa default output. > > > I can specify hw0,3 which works but it disables dmix. > > > So the problem is how to enable hdmi audio out this way that > > > aplay -Ddefault > > > can use all available outputs simultaniously (analog, sp/dif, and hdmi). > > > > It's not supported because the analog and HDMI comes from different > > codecs. > > are analog and sp/dif stuff coming from the same codecs? Very much depends on the hardware implementation, but in some cases yes. Check your codec pin-default configurations. > I am asking because analog and sp/dif are active in the default setup. > When using aplay I am getting signal on analog and sp/dif connectors. > So why not analog and HDMI? It's a hardware design. > Is there really no way to configure this with a custom ~/.asoundrc? You can set up in a software way, of course :) Takashi _______________________________________________ Alsa-devel mailing list Alsa-devel@xxxxxxxxxxxxxxxx http://mailman.alsa-project.org/mailman/listinfo/alsa-devel
