>Ben Dooks wrote:
>The gta02 build is missing <mach/regs-gpio.h> and is also using the
>incorrect <asm/io.h> header (it should be <linux/io.h>). Fix these
>two problems.
>
>Signed-off-by: Ben Dooks <ben@xxxxxxxxxxxx>
>Signed-off-by: Simtec Linux Team <linux@xxxxxxxxxxxx>
>
>---
> sound/soc/s3c24xx/neo1973_gta02_wm8753.c | 4 +++-
> 1 file changed, 3 insertions(+), 1 deletion(-)
>Index: b/sound/soc/s3c24xx/neo1973_gta02_wm8753.c
>===================================================================
>--- a/sound/soc/s3c24xx/neo1973_gta02_wm8753.c 2009-10-10
22:55:53.000000000 +0100
>+++ b/sound/soc/s3c24xx/neo1973_gta02_wm8753.c 2009-10-10
22:58:31.000000000 +0100
>@@ -19,6 +19,8 @@
> #include <linux/interrupt.h>
> #include <linux/platform_device.h>
> #include <linux/gpio.h>
>+#include <linux/io.h>
>+
> #include <sound/core.h>
> #include <sound/pcm.h>
> #include <sound/soc.h>
>@@ -29,7 +31,7 @@
> #include <plat/regs-iis.h>
> #include <mach/regs-clock.h>
>-#include <asm/io.h>
>+#include <mach/regs-gpioj.h>
This file is not using any of the symbols from regs-gpioh.h directly.
It only uses GTA02_GPIO_{HP_IN,AMP_SHUT} from gta02.h which are
defined as S3C2440_GPJX.
So the include of regs-gpioj.h should rather go into gta02.h than here.
- Lars
_______________________________________________
Alsa-devel mailing list
Alsa-devel@xxxxxxxxxxxxxxxx
http://mailman.alsa-project.org/mailman/listinfo/alsa-devel
