Hi all, I agree with the previous posts in this thread. The use of > 48kHz sample rate is common use today, so if the hardware supports it, the driver should not disable it. Since there are some users that successfully use SPDIF with > 48kHz, it cannot be a general hardware problem. If there's a general hardware problem, then it would never work for anyone. If there are some codec chips/variants/versions, or even certain boards that have bad SPDIf signal performance, then we should black-list those bad chips/versions/boards, rather than disable the feature for everyone. Also, as far as I understand, the worst thing that can happen when a "too high" sample rate is used: It will not work for some users on some hardware. That, I think, is acceptable (if no workaround / black-list can be created). This would be different if there are other effects: If the high sample rate would cause some hardware-lock-up or similar, then it definitely needs to be disabled. Regards, -- - Harald Welte <laforge@xxxxxxxxxxxx> http://laforge.gnumonks.org/ ============================================================================ "Privacy in residential applications is a desirable marketing option." (ETSI EN 300 175-7 Ch. A6) _______________________________________________ Alsa-devel mailing list Alsa-devel@xxxxxxxxxxxxxxxx http://mailman.alsa-project.org/mailman/listinfo/alsa-devel
