Hi, When I try to capture audio in MMAP mode using the following command, it works properly: arecord -f cd -d 10 -M rec01.wav However, if I specify '-v' along with the above command, it fails to capture anything and prints log and returns immediately: Recording WAVE 'rec03.wav' : Signed 16 bit Little Endian, Rate 44100 Hz, Stereo Plug PCM: Hardware PCM card 0 'omap3evm' device 0 subdevice 0 Its setup is: stream : CAPTURE access : MMAP_INTERLEAVED format : S16_LE subformat : STD channels : 2 rate : 44100 exact rate : 44100 (44100/1) msbits : 16 buffer_size : 22052 period_size : 5513 period_time : 125011 tstamp_mode : NONE period_step : 1 avail_min : 5513 period_event : 0 start_threshold : 1 stop_threshold : 22052 silence_threshold: 0 silence_size : 0 boundary : 1445199872 appl_ptr : 0 hw_ptr : 0 mmap_area[0] = 0x4030e000,0,32 (16) mmap_area[1] = 0x4030e000,16,32 (16) I have not observed this problem while playing audio, only while capture this issue crops up. Any pointers? Thanks & Regards, Anuj Aggarwal _______________________________________________ Alsa-devel mailing list Alsa-devel@xxxxxxxxxxxxxxxx http://mailman.alsa-project.org/mailman/listinfo/alsa-devel
