On Thu, Sep 17, 2009 at 08:35:56PM +0900, jassi brar wrote:
> This note means stands for the forthcoming cases. The explanation is already
> given above the switch.
> /* Currently, WM8580 driver doesn't support PLL-out rates
> * other than those mentioned in Table-52 Page-58 of WM8580A
> * manual. Some of these unavailable rates include
> * {8000x256, 64000x256, 11025x256}Hz.
Which version of the datasheet are you looking at? Table 52 in the
current version 4.7 is (as it says) a list of example configurations,
not an exhaustive list of supported configurations. Anything within the
operating characteristics of the PLL is supported, set_pll() should
enforce this where required.
> > All my previous comments about these and the way they're being
> > configured still apply.
> Once 6channel support is up, i will submit a patch to implement audio
> routing options
> using snd_soc_add_controls. Whereby user can set audio route on the device.
> For now, as we have only 2channels enabled, i decided to enable only Front-L/R
> and keep others disabled. Of the Mic and LineIn, we enable LineIn by
> default. How is that?
Please just remove this for now or at most enable everything by default,
like I say it's not buying anything except confusion as it stands.
If it's not present then the machine driver will immediately work when
six channel support is added.
_______________________________________________
Alsa-devel mailing list
Alsa-devel@xxxxxxxxxxxxxxxx
http://mailman.alsa-project.org/mailman/listinfo/alsa-devel
