On Sun, Sep 06, 2009 at 09:09:41AM +0900, jassi brar wrote: > + case WM8580_MCLKRATIO: > + case WM8580_BCLKRATIO: There should be no need for machine drivers to configure any of this, there's already enough information in the CODEC driver to figure out this configuration without their help. Having the machine drivers do it manually simply forces each machine driver using the chip to repeat the same logic which is at best redundant and at worst makes machine drivers harder to write. As mentioned previously this driver could use a bit of modernisation in general, including with regard to clocking, which I had already been planning to do as part of working on the SMDK boards. As a result of some work on another chip with a very similar clocking structure I have a rough draft of what needs doing for the clocks already. This is part of why in my earlier mail I had recommended focusing on the CPU DAI drivers for now - the lack of them is the biggest obstacle to getting that work cleaned up and tested. _______________________________________________ Alsa-devel mailing list Alsa-devel@xxxxxxxxxxxxxxxx http://mailman.alsa-project.org/mailman/listinfo/alsa-devel
