Shilpa Kedar Walvekar wrote: > Hello, > > We tried to record and play the recorded file using arecord and aplay as follows: > arecord -f cd /home/test.wav > aplay -f cd /home/test.wav > > The file gets recorded and played correctly. > > But if I try to record file of format S8 or U8, I get error: > > # arecord -f U8 /home/test_alsa_record_2 > Recording WAVE '/home/test_alsa_record_2' : Unsigned 8 bit, Rate 8000 Hz, Mono > arecord: set_params:979: Sample format non available > > # arecord -f S8 /home/alsa_record_2 > Recording WAVE '/home/alsa_record_2' : Signed 8 bit, Rate 8000 Hz, Mono > arecord: set_params:979: Sample format non available > > Is there any other way to set the format as S8 or U8? Or only cd/cdr/dat formats can be played using alsa? Basically it should be possible to play these formats. If you look at the aplay help output, it also lists the recognized sample formats (which include U8 and S8). However, it also says "Some of these may not be available on selected hardware". For this reason I assume that your hardware (or at least the driver) does not support these formats. A workaround is to use one of the ALSA format conversion plugins. (see here: http://www.alsa-project.org/alsa-doc/alsa-lib/pcm_plugins.html) Specifically have a look at the rate or plug plugin. The idea is that you can play arbitrary formats and the plugin automatically converts the PCM streams to a fixed format that your hardware can deal with (e.g. 16 bit at 48 kHz). cheers, stefan _______________________________________________ Alsa-devel mailing list Alsa-devel@xxxxxxxxxxxxxxxx http://mailman.alsa-project.org/mailman/listinfo/alsa-devel
