On Wednesday 15 July 2009 04:04:08 ext Candelaria Villareal, Jorge wrote: > Board sdp3430 has hardware support for EXTMUTE using TWL4030 GPIO6 > line, controlled by register INTBR_PMBR1. Machine driver takes care > of enabling gpio line through i2c and codec driver manipulates the > line during headset ramp up/down sequence. > > +#define TWL4030_INTBR_PMBR1 0x0D > +#define EXTMUTE(value) (value << 2) This is confusing, should it be something like this?: #define GPIO6_PWM0_MUX(value) (value << 2) > + /* Set TWL4030 GPIO6 as EXTMUTE signal */ > + twl4030_i2c_write_u8(TWL4030_MODULE_INTBR, EXTMUTE(0x02), > + TWL4030_MODULE_INTBR); I think you meant this: twl4030_i2c_write_u8(TWL4030_MODULE_INTBR, EXTMUTE(0x02), TWL4030_INTBR_PMBR1); Furthermore, since you are modifying pin muxing register, I think it is safer to do something like this here to avoid changing other pin's function: u8 pin_mux; twl4030_i2c_read_u8(TWL4030_MODULE_INTBR, &pin_mux, TWL4030_INTBR_PMBR1); pin_mux &= ~GPIO6_PWM0_MUX(0x3); pin_mux |= GPIO6_PWM0_MUX(0x2); twl4030_i2c_write_u8(TWL4030_MODULE_INTBR, pin_mux, TWL4030_INTBR_PMBR1); -- Péter _______________________________________________ Alsa-devel mailing list Alsa-devel@xxxxxxxxxxxxxxxx http://mailman.alsa-project.org/mailman/listinfo/alsa-devel
