CCing Jesslyn Abdul Salam <jesslyn.abdulsalam@xxxxxxxxx> Hope he has one osk. On Mon, Aug 3, 2009 at 10:53 AM, Arun KS <arunks@xxxxxxxxxxxxxxxxxxxx> wrote: > > > On Mon, Aug 3, 2009 at 7:00 AM, Janusz Krzysztofik <jkrzyszt@xxxxxxxxxxxx> wrote: >> >> Jarkko Nikula wrote: >>> >>> On Mon, 3 Aug 2009 03:32:04 +0200 >>> Janusz Krzysztofik <jkrzyszt@xxxxxxxxxxxx> wrote: >>> >>>> This patch tries to correct the problem of full duplex mode not working >>>> over a single McBSP based CPU DAI. >>>> >>>> Created against linux-2.6.31-rc5. >>>> Tested on Amstrad Delta. >>>> >>> Do you have some specific test case how to trigger this? I haven't >>> seen this on 2420 or 34xx (e.g. with 'arecord -d 1 -f dat |aplay') but >>> I have no doubt that this can happen on 1510. At least this doesn't >>> cause any harm on Beagle so I'm fine with the fix. >> >> Hi, >> I made more testing on my OMAP1510 and found out that I could get your example usage working without my patch, but only if started like this: >> >> arecord -D hw:0,0 -f S16_LE|aplay -D hw:0,0 >> >> If I start the same with "-D hw:0,0" omitted from aplay, it doesn't work any longer, waiting forever. It definitelly doesn't work if I start capture and playback one after another, no matter which one goes first (record while playing or play while recording). So it looks like starting both streams simultaneously can do the job, but a short delay breaks it. >> >> With my patch, it seems to work fine for me in all cases. >> >> Jarkko, have you ever tried it on your OMAP2/3 with parallel playback and capture started one after another, not simultaneously? >> >> Arun, can your snd-soc-osk9512 work on OMAP1610 in full duplex mode without any limitations? > > > Janusz, > > Haven't done testing in full duplex mode. > I don't have access to osk5912 board now. If someone has got osk and do the testing it ll be good. It ll take at least another 2 more month for me to do the testing on osk. > > Regards, > Arun > >> >> >> If the problem appears to be OMAP1510 or AMS_DELTA specific, I can add a check for a machine or cpu type to avoid braking unaffected machines. >> >> Thanks, >> Janusz >> >> -- >> To unsubscribe from this list: send the line "unsubscribe linux-omap" in >> the body of a message to majordomo@xxxxxxxxxxxxxxx >> More majordomo info at http://vger.kernel.org/majordomo-info.html > _______________________________________________ Alsa-devel mailing list Alsa-devel@xxxxxxxxxxxxxxxx http://mailman.alsa-project.org/mailman/listinfo/alsa-devel
