On Thu, Jul 23, 2009 at 05:33:17PM +0900, Joonyoung Shim wrote: > The MAX9877 needs an address of start register when we write values to > registers through i2c_master_send(), but the code for this was missed in > max9877_write_regs(). > If the value of control is 0 in the max9877_set_out_mode(), the value is > not increased to 1, but actually the value to write to the register > should be 1. > And the register bits for out_mode and osc_mode should be cleared before > writing. Applied, thanks. _______________________________________________ Alsa-devel mailing list Alsa-devel@xxxxxxxxxxxxxxxx http://mailman.alsa-project.org/mailman/listinfo/alsa-devel
