On Wed, Jul 22, 2009 at 18:12:14, Mark Brown wrote: > On Wed, Jul 22, 2009 at 07:45:04AM -0400, Chaithrika U S wrote: > > PLL was not being enabled when it was not bypassed. This patch > > enables the PLL when it is used. Additionally, it disables the PLL > > when it is bypassed. > > > > Without this patch, the audio on TI DM646x EVM and DM355 EVM > > does not work properly. The bit clocks and the frame sync signals > > from the codec are not correct and hence the playback/record are faster > > than usual for most sample rates. The reason for this was that the PLL > > was not enabled when it was not bypassed. > > Looks reasonable though I've no knowledge of the CODEC. Sounds like > this is needed in 2.6.31? > Yes, it is needed in 2.6.31. Regards, Chaithrika _______________________________________________ Alsa-devel mailing list Alsa-devel@xxxxxxxxxxxxxxxx http://mailman.alsa-project.org/mailman/listinfo/alsa-devel
