Takashi, please, what must I do to get your xfi driver to stop clicking? On Thu, 2009-07-16 at 11:22 +0200, Takashi Iwai wrote: > At Wed, 15 Jul 2009 12:55:23 +0200, > Frashman wrote: > > > > Hi Takashi, > > > > first of all, thank you for developing this driver. > > I tested it today. It works, so far. > > > > But two annoying things. As you mentioned, I got problems, if the > > onboard sound modules are loaded. Then i get no sound out auf my xfi. > > It's likely the collision of PCI device ID. > Some X-Fi models support both HD-audio and emu20kx-native modes. The > modes are switched by some magical sequence. > > Anyway, please run alsa-info.sh with --no-upload option, and attach > the generated file. > > > If I disable the loading of snd-hda-intel modules while booting, then it > > works. > > > > The second problem is, that SIDE and SURROUND connectors are > > interchanged. I'm absolutly sure, it works fine under windows and the > > connector colors are also correct. > > > > If I run speaker-test -c8 the SIDE Speakers sounds come out of my REAR > > (SURROUND) Speakers, while nothing is coming out of my rear speakers, if > > i'm using speaker-test -c6 > > So, the side channels (channel 7 & 8) and the rear channels (3 & 4) > are swapped when running with 8 channel mode? > > > Takashi > _______________________________________________ > Alsa-devel mailing list > Alsa-devel@xxxxxxxxxxxxxxxx > http://mailman.alsa-project.org/mailman/listinfo/alsa-devel _______________________________________________ Alsa-devel mailing list Alsa-devel@xxxxxxxxxxxxxxxx http://mailman.alsa-project.org/mailman/listinfo/alsa-devel
