At Sun, 5 Jul 2009 13:29:48 +0200, Christian Esken wrote: > > Am Sonntag 05 Juli 2009 09:44:33 schrieb Takashi Iwai: > > At Sun, 5 Jul 2009 00:19:55 +0200, > > > > Christian Esken wrote: > > > Am Samstag 27 Juni 2009 14:05:45 schrieb Christian Esken: > > > > Hello, > > > > > > > > unfortunately I cannot playback anything (PCM) with the new SB X-Fi > > > > driver. Driver: > > > > ftp://ftp.kernel.org/pub/linux/kernel/people/tiwai/snapshot/alsa- > > > > driver-snapshot.tar.bz2 > > > > Distribution: openSuSE 11.1 > > > > Kernel: 2.6.27.23-0.1-xen > > > > > > > > My card is a "X-Fi Titanium" (PCI device code: 1102:000b). The card is > > > > recognized by the driver, and any mixer (alsamixer, kmix) also > > > > recognizes the card. > > > > > > > > But playing back isn't possible. I tried speaker-test, audacity, amarok > > > > and aplay. Most applications hang, some also produce an error in the > > > > /var/log/messages (see > > > > below). > > > > > > > > I then used "./configure --with-debug=full --with-cards=ctxfi" due to > > > > the possible hd-audio conflict, but it didn't make a difference. > > > > > > > > Is there anything else I could try? > > > > > > I tested the same openSuSE version with a non-Xen 64 bit kernel, and it > > > doesn't work either. > > > > > > And I tried with this: > > > Driver: alsa-driver-20090704.tar.bz2 > > > Distribution: Kubuntu Karmic Alpha-2 > > > Kernel: 2.6.30 (32 Bit) > > > > > > Under the latter setup the X-Fi Titanium works (Simple 2 channel test > > > with speaker-test, audacity, amarok). :-)) > > > > How many RAM do you have? > > Could you boot with the limited memory size? > > It is just 2GB. So I am not limited by the 32 bit barrier. > > So booting with "limited" memory size doesn't make sense, right? Supposedly. Is it emu20k1 or emu20k2? Takashi _______________________________________________ Alsa-devel mailing list Alsa-devel@xxxxxxxxxxxxxxxx http://mailman.alsa-project.org/mailman/listinfo/alsa-devel