On Monday 29 June 2009 08:37:58 Peter Ujfalusi wrote:> On Monday 29 June 2009 01:08:59 ext Janusz Krzysztofik wrote:> > For capture, reading CPC, that follows destination port address progress,> > just works fine (for both old and new driver). For playback, similar> > hardware functionality seems to be missing, so it has to be emulated in> > software if required.>> Hmmm, I had taken a look at the 2.4.21 kernel sources, which I have laying> around in my disk from an old project which used OMAP1510. The OSS audio> code does use the CPC register for determining the DMA progress both for> playback and recording. I know that the audio was working OK on that board,> since we had doom running there. I am not able to find any information on how DMA can be configured for CPC to reflect either source or destination port address progress. Official documentation, even if not very clear for me, seems to suggest that it always follows destination port address, even if constatnt (ie DMA_CCR:DST_AMODE(15:14) == 0). > The difference that I can see is that the OSS code also configured the> CCR:SYNC(4:0) bits as well.> Looking at the DMA_CPC register description in the OMAP1510 TRM: it list> two cases on how it behaves and both require the DMA_CCR:SYNC != 0... Not exactly. According to my copy of http://focus.ti.com/lit/ug/spru674/spru674.pdf, the secnod case is: If the channel transfer is synchronized on frames (DMA_CCR SYNC ≠ 0 and DMA_CCR FS = 1) or not synchronized (DMA_CCR SYNC = 0), the register is updated with 16 LSB of the address each time the destination port issues the last request for a frame. Anyway, that seems to be irrelevant in our case. > The current DMA code for OMAP1510 just plain ignores the DMA_CCR:SYNC for> some reason. Not exactly. Even if not touched inside any of omap_set_dma_transfer_params(), omap_set_dma_src_params() nor omap_set_dma_dest_params(), these bits are already set by arch/arm/plat-omap/dma.c:omap_request_dma(int dev_id, ...): 765 } else if (cpu_is_omap7xx() || cpu_is_omap15xx()) { 766 dma_write(dev_id, CCR(free_ch)); > Can you try the following patch: Sure. I remember we already talk about this before. That time, I had only verified that the change you proposed did not help in solving a different problem I used to have before. Then I found the above explanation, but never got an idea to let you know. > iff --git a/arch/arm/plat-omap/dma.c b/arch/arm/plat-omap/dma.c> index 7fc8c04..38874e4 100644> --- a/arch/arm/plat-omap/dma.c> +++ b/arch/arm/plat-omap/dma.c> @@ -266,6 +266,8 @@ void omap_set_dma_transfer_params(int lch, int> data_type, int elem_count,> ccr &= ~(1 << 5);> if (sync_mode == OMAP_DMA_SYNC_FRAME)> ccr |= 1 << 5;> + if (dma_trigger)> + ccr |= dma_trigger & 0x1f;> dma_write(ccr, CCR(lch));>> ccr = dma_read(CCR2(lch)); BTW, here the code tries to read (and than write) an address (CCR2) that is not supported on OMAP1510. I have not noticed any side effects, neither negative nor positive, but can provide a patch if OMAP guys ever find patching this as desired. > Than can you print out in case of playback both the destination and source> addresses supplied to the DMA, than in the pointer callback also print out> the value returned by the omap_get_dma_src_pos function to see if this> actually helps? Here you are. Same figures wheather with or without your patch. I also printed a value that CCR is written with, so you can verify those SYNC(4:0) bits are set correctly. root@amsdelta:~# aplay -f S16_LE -t raw -d 1 </dev/urandomPlaying raw data 'stdin' : Signed 16 bit Little Endian, Rate 8000 Hz, Mono[ 116.780000] omap_pcm_prepare(): dma_params.src_start = 0x11d80000[ 116.780000] omap_pcm_prepare(): dma_params.dst_start = 0xe1011806[ 116.790000] omap_set_dma_src_params(): dma_write(0x11d8, CSSA_U(0x0)[ 116.800000] omap_set_dma_src_params(): dma_write(0x0000, CSSA_L(0x0)[ 116.810000] omap_set_dma_dest_params(): dma_write(0x1008, CCR(0x0))[ 116.820000] omap_set_dma_dest_params(): dma_write(0xe101, CDSA_U(0x0)[ 116.830000] omap_set_dma_dest_params(): dma_write(0x1806, CDSA_L(0x0)[ 116.900000] omap_get_dma_src_pos(): dma_read(CPC(0x0)) == 0x1806[ 116.900000] omap_pcm_pointer(): offset = 0x0c03[ 116.920000] omap_get_dma_src_pos(): dma_read(CPC(0x0)) == 0x1806[ 116.920000] omap_pcm_pointer(): offset = 0x0c03[ 116.950000] omap_get_dma_src_pos(): dma_read(CPC(0x0)) == 0x1806[ 116.950000] omap_pcm_pointer(): offset = 0x0c03[ 116.980000] omap_get_dma_src_pos(): dma_read(CPC(0x0)) == 0x1806[ 116.980000] omap_pcm_pointer(): offset = 0x0c03[ 116.990000] omap_get_dma_src_pos(): dma_read(CPC(0x0)) == 0x1806[ 116.990000] omap_pcm_pointer(): offset = 0x0c03[ 117.010000] omap_get_dma_src_pos(): dma_read(CPC(0x0)) == 0x1806[ 117.010000] omap_pcm_pointer(): offset = 0x0c03[ 117.140000] omap_get_dma_src_pos(): dma_read(CPC(0x0)) == 0x1806[ 117.140000] omap_pcm_pointer(): offset = 0x0c03underrun!!! (at least 1799126512.681 ms long)[ 117.150000] omap_pcm_prepare(): dma_params.src_start = 0x11d80000[ 117.170000] omap_pcm_prepare(): dma_params.dst_start = 0xe1011806[ 117.170000] omap_set_dma_src_params(): dma_write(0x11d8, CSSA_U(0x0)[ 117.180000] omap_set_dma_src_params(): dma_write(0x0000, CSSA_L(0x0)[ 117.190000] omap_set_dma_dest_params(): dma_write(0x1008, CCR(0x0))[ 117.200000] omap_set_dma_dest_params(): dma_write(0xe101, CDSA_U(0x0)[ 117.210000] omap_set_dma_dest_params(): dma_write(0x1806, CDSA_L(0x0)[ 117.340000] omap_get_dma_src_pos(): dma_read(CPC(0x0)) == 0x1806[ 117.340000] omap_pcm_pointer(): offset = 0x0c03root@amsdelta:~# And here, the same with capture, just for reference: root@amsdelta:~# arecord -f S16_LE -t raw -d 1 >/dev/nullRecording raw data 'stdin' : Signed 16 bit Little Endian, Rate 8000 Hz, Mono[ 316.530000] omap_pcm_prepare(): dma_params.src_start = 0xe1011802[ 316.540000] omap_pcm_prepare(): dma_params.dst_start = 0x11da0000[ 316.550000] omap_set_dma_src_params(): dma_write(0xe101, CSSA_U(0x0)[ 316.550000] omap_set_dma_src_params(): dma_write(0x1802, CSSA_L(0x0)[ 316.560000] omap_set_dma_dest_params(): dma_write(0x4009, CCR(0x0))[ 316.570000] omap_set_dma_dest_params(): dma_write(0x11da, CDSA_U(0x0)[ 316.580000] omap_set_dma_dest_params(): dma_write(0x0000, CDSA_L(0x0)[ 316.590000] omap_get_dma_src_pos(): dma_read(CPC(0x0)) == 0x01c2[ 316.590000] omap_pcm_pointer(): offset = 0x00e1[ 316.610000] omap_get_dma_src_pos(): dma_read(CPC(0x0)) == 0x00dc[ 316.610000] omap_pcm_pointer(): offset = 0x006e[ 316.620000] omap_get_dma_src_pos(): dma_read(CPC(0x0)) == 0x01b8[ 316.620000] omap_pcm_pointer(): offset = 0x00dc[ 316.630000] omap_get_dma_src_pos(): dma_read(CPC(0x0)) == 0x0294[ 316.630000] omap_pcm_pointer(): offset = 0x014a[ 316.650000] omap_get_dma_src_pos(): dma_read(CPC(0x0)) == 0x037e[ 316.650000] omap_pcm_pointer(): offset = 0x01bf... Now, playback with my workaround applied, slightly modified for always reporting dma_read(CPC(0x0)) result, even if not used for offset calculation: root@amsdelta:~# aplay -f S16_LE -t raw -d 1 </dev/urandomPlaying raw data 'stdin' : Signed 16 bit Little Endian, Rate 8000 Hz, Mono[ 182.990000] omap_pcm_prepare(): dma_params.src_start = 0x11d80000[ 183.000000] omap_pcm_prepare(): dma_params.dst_start = 0xe1011806[ 183.010000] omap_set_dma_src_params(): dma_write(0x11d8, CSSA_U(0x0)[ 183.020000] omap_set_dma_src_params(): dma_write(0x0000, CSSA_L(0x0)[ 183.030000] omap_set_dma_dest_params(): dma_write(0x1008, CCR(0x0))[ 183.040000] omap_set_dma_dest_params(): dma_write(0xe101, CDSA_U(0x0)[ 183.050000] omap_set_dma_dest_params(): dma_write(0x1806, CDSA_L(0x0)[ 183.120000] omap_get_dma_src_pos(): dma_read(CPC(0x0)) == 0x1806[ 183.120000] omap_pcm_pointer(): offset = 0x0000[ 183.230000] omap_get_dma_src_pos(): dma_read(CPC(0x0)) == 0x1806[ 183.230000] omap_pcm_pointer(): offset = 0x03e8[ 183.260000] omap_get_dma_src_pos(): dma_read(CPC(0x0)) == 0x1806[ 183.260000] omap_pcm_pointer(): offset = 0x03e8[ 183.360000] omap_get_dma_src_pos(): dma_read(CPC(0x0)) == 0x1806[ 183.360000] omap_pcm_pointer(): offset = 0x07d0[ 183.380000] omap_get_dma_src_pos(): dma_read(CPC(0x0)) == 0x1806[ 183.380000] omap_pcm_pointer(): offset = 0x07d0[ 183.480000] omap_get_dma_src_pos(): dma_read(CPC(0x0)) == 0x1806[ 183.480000] omap_pcm_pointer(): offset = 0x0bb8[ 183.510000] omap_get_dma_src_pos(): dma_read(CPC(0x0)) == 0x1806[ 183.510000] omap_pcm_pointer(): offset = 0x0bb8[ 183.610000] omap_get_dma_src_pos(): dma_read(CPC(0x0)) == 0x1806[ 183.610000] omap_pcm_pointer(): offset = 0x0000[ 183.730000] omap_get_dma_src_pos(): dma_read(CPC(0x0)) == 0x1806[ 183.730000] omap_pcm_pointer(): offset = 0x03e8[ 183.860000] omap_get_dma_src_pos(): dma_read(CPC(0x0)) == 0x1806[ 183.860000] omap_pcm_pointer(): offset = 0x07d0[ 183.980000] omap_get_dma_src_pos(): dma_read(CPC(0x0)) == 0x1806[ 183.980000] omap_pcm_pointer(): offset = 0x0bb8[ 184.110000] omap_get_dma_src_pos(): dma_read(CPC(0x0)) == 0x1806[ 184.110000] omap_pcm_pointer(): offset = 0x0000root@amsdelta:~# Peter,I have really no idea how the old 2.4 code could do the job with just reading CPC for both capture and playback, but if you think that with my ams-delta machine on hand I can still help you in finding that out, please let me know. Cheers,Janusz_______________________________________________Alsa-devel mailing listAlsa-devel@xxxxxxxxxxxxxxxxxxxx://mailman.alsa-project.org/mailman/listinfo/alsa-devel
