On Thursday 25 June 2009 12:47:54 ext shariff wrote: > Hi all, > > Iam working on OMAP3 based custom board. On our board, GSM digital > audio path is connected to McBSP3 and > TWL4030 digital audio path is connected to McBSP2. > > I want to implement a module that transfers GSM audio data and store audio > data into some buffer and redirect it to TWL4030 audio codec through > McBSP2. > > I question is how can I implement this in ASoC? > > I studied ASoC framework, but I am unable to understand where to implement > my stuff. I think the following should do something like that: arecord -Dplughw:0.0 | aplay -Dplughw:0.1 or arecord -Dhw:0.0 | aplay -Dhw:0.1 I don't know what is the order of the PCMs with the twl4030 codec on your board, this is with the assumption: plughw:0.0 - Voice PCM (McBSP3) plughw:0.1 - Digital audio PCM (McBSP2) You might want to try the --rate parameter for arecord to use 16KHz recording from the Voice interface.. > > Regards, > Shariff > _______________________________________________ > Alsa-devel mailing list > Alsa-devel@xxxxxxxxxxxxxxxx > http://mailman.alsa-project.org/mailman/listinfo/alsa-devel -- Péter _______________________________________________ Alsa-devel mailing list Alsa-devel@xxxxxxxxxxxxxxxx http://mailman.alsa-project.org/mailman/listinfo/alsa-devel
