With model=fujitsu-pi2515
- jack sensing works (great!!!)
- still no control over sub-woofer
- there is some noise, but maybe is just the quality of my hardware
with model=fujitsu-xa3530
- no jack sensing
- the mixers are really mixed up - one slider controls one side of front
speakers and other side of headphones
- there is some(not sure) control over sub-woofer volume
when I was using 3-stack-dig there were two slider (LFE and another one)
that booth controlled the sub-woofer and there was third - "side" that was
not controlling anything.
If there is a way to add a sub-woofer control to fujitsu-pi2515 it would be
great - if it's too much too ask from you to do it, can you tell me where to
start looking for a documented way to create a patch for a new type of
model? (fujitsu-xi for example as it's the model of my laptop) I'm allready
reading the other docs that you told me about.
Best regadrs
Stefan Krastanov
2009/6/23 Takashi Iwai <tiwai@xxxxxxx>
> At Tue, 23 Jun 2009 00:05:42 +0200,
> Stefan Krastanov wrote:
> >
> > Hello,
> >
> > Thank you for your fast response, I appreciate it, knowing you don't have
> all
> > that free time.
> >
> > As I have said my hardware configuration is: laptop with alc889 soundcard
> > - two
> front
> > speakers
> > - one
> > sub-woofer
> > - one
> > internal microphone
> > -
> jacks
> > with jacksensing (tested on windows) - mic, line-in, headphones
> > -
> digital
> > IO
> > -
> > potentiometer for volume control
> >
> > I installed the latest snapshot using ubuntu's automated script (I
> manually
> > verified that it's the latest) and used model=auto. The results were the
> same
> > when I tried it few months ago:
> > - "Front" controls the front speakers OK
> > - "Front" also controls headphones
> problem
> > - "Headphones" slider does not control anything problem
> > - No control slider for the build-in sub-woofer problem
> > - microphones working (external and internal) OK
> > - potentiometer for volume control not working problem
> > - Line-in not tested, digital IO not tested not
> tested
> > - jack sensing on the headphones is not working problem
> > - jack sensing on microphone and line in not tested not tested
> >
> > Attached to the message you can find the output from alsa-info.
>
> Hm, how about model=fujitsu-pi2515 or model=fujitsu-xa3530 option?
> Just a wild guess from the PCI SSID, though.
>
>
> Takashi
>
_______________________________________________
Alsa-devel mailing list
Alsa-devel@xxxxxxxxxxxxxxxx
http://mailman.alsa-project.org/mailman/listinfo/alsa-devel
