On Fri, 2009-06-19 at 20:44 +0200, Takashi Iwai wrote: > At Fri, 19 Jun 2009 21:18:49 +0300, > Maxim Levitsky wrote: > > > > On Fri, 2009-06-19 at 08:32 +0200, Takashi Iwai wrote: > > > echo "loopback yes" > /sys/class/sound/hwC0D0/hints > > > > > > This is unmerged feature? > > > > root@MAIN:/home/maxim# cat /sys/class/sound/hwC0D2/ > > dev device/ power/ subsystem/ uevent > > > > > > I use -git of the kernel > > Set CONFIG_SND_HDA_RECONFIG=y. > > > Takashi Ok, I see it now, but then I put these commands in /etc/rc.local echo "loopback=yes" > /sys/class/sound/hwC0D2/hints echo 1 > /sys/class/sound/hwC0D2/reconfig and I get this, and almost empty mixer [ 57.353168] hda-codec: reconfiguring [ 57.426105] stac92xx_auto_fill_dac_nids: No available DAC for pin 0xd [ 59.121418] e1000e 0000:00:19.0: irq 29 for MSI/MSI-X [ 59.172115] e1000e 0000:00:19.0: irq 29 for MSI/MSI-X [ 60.585005] e1000e: eth0 NIC Link is Up 100 Mbps Full Duplex, Flow Control: RX/TX [ 60.585011] 0000:00:19.0: eth0: 10/100 speed: disabling TSO I had to reload the driver and apply the above commands to make it and loopback work... Why? It all did work fine before. Regards, Maxim Levitsky _______________________________________________ Alsa-devel mailing list Alsa-devel@xxxxxxxxxxxxxxxx http://mailman.alsa-project.org/mailman/listinfo/alsa-devel
