> From: alsa-devel-bounces@xxxxxxxxxxxxxxxx [mailto:alsa-devel- > bounces@xxxxxxxxxxxxxxxx] On Behalf Of Jaroslav Kysela > On Fri, 12 Jun 2009, Steve Langstaff wrote: > > >> From: alsa-devel-bounces@xxxxxxxxxxxxxxxx [mailto:alsa-devel- > >> bounces@xxxxxxxxxxxxxxxx] On Behalf Of Jaroslav Kysela > > > >> On Fri, 12 Jun 2009, Steve Langstaff wrote: > > > >>> Slave: Hardware PCM card 0 'LM4549' device 0 subdevice 0 > >> > >>> msbits : 16 > >> > >> If I remember correctly, this value was 32 in your dmix setup. > >> Could you try command: > >> > >> aplay -D"plug:'dmix:FORMAT=S16_LE'" <filename> > > > > Yes, that works fine - is there something wrong with my configuration > do you > > think? > > It seems that 32-bit samples are not handled correctly in driver. > What's your hardware? Output from alsa-info.sh script might be helpful > for > identification. I don't have alsa-info.sh installed, but here is the hardware info that I can glean... ~ # aplay -l **** List of PLAYBACK Hardware Devices **** card 0: LM4549 [LM4549], device 0: PXA2xx-PCM [] Subdevices: 1/1 Subdevice #0: subdevice #0 ~ # lsmod |fgrep snd snd_page_alloc 6684 1 snd_pcm soundcore 6844 1 snd snd 51952 4 snd_pxa2xx_ac97,snd_ac97_codec,snd_pcm,snd_timer snd_timer 21340 1 snd_pcm snd_pcm 73449 4 snd_pxa2xx_ac97,snd_ac97_codec,snd_pxa2xx_pcm,snd_pxa2xx_lib snd_pxa2xx_lib 10748 2 snd_pxa2xx_ac97,snd_pxa2xx_pcm snd_pxa2xx_pcm 2536 1 snd_pxa2xx_ac97 ac97_bus 1716 1 snd_ac97_codec snd_ac97_codec 105828 1 snd_pxa2xx_ac97 snd_pxa2xx_ac97 4236 0 _______________________________________________ Alsa-devel mailing list Alsa-devel@xxxxxxxxxxxxxxxx http://mailman.alsa-project.org/mailman/listinfo/alsa-devel