Hi there.
I would like to get a confirmation on below.
One of my USB soundcards is a M-Audio Transit.
cat /proc/asound/card0/stream0
lists below:
M-Audio Transit USB at usb-0000:00:1d.2-1.3, full speed : USB Audio
Playback:
Status: Running
Interface = 1
Altset = 3
URBs = 2 [ 1 1 ]
Packet Size = 196
Momentary freq = 44100 Hz (0x2c.199a)
Interface 1
Altset 1
Format: 0x20 (24 bits)
Channels: 2
Endpoint: 3 OUT (ADAPTIVE)
Rates: 48001 - 96000 (continuous)
Interface 1
Altset 2
Format: 0x20 (24 bits)
Channels: 2
Endpoint: 3 OUT (NONE)
Rates: 8000 - 48000 (continuous)
Interface 1
Altset 3
Format: 0x2 (16 bits)
Channels: 2
Endpoint: 3 OUT (ASYNC)
Rates: 8000 - 48000 (continuous)
Do I interprete it right that the Transit runs in asynchronous USB mode up
to 48khz and 16bit?
Does above also mean that <48/24 is not supported?
THX
Klaus
_______________________________________________
Alsa-devel mailing list
Alsa-devel@xxxxxxxxxxxxxxxx
http://mailman.alsa-project.org/mailman/listinfo/alsa-devel
