On Thu, May 28, 2009 at 10:00 AM, Peter Korsgaard <jacmet@xxxxxxxxxx> wrote: >>>>>> "Jon" == Jon Smirl <jonsmirl@xxxxxxxxx> writes: > > Hi, > > Jon> Fabric bindings for STAC9766 AC97 codec on the Efika. > Jon> Signed-off-by: Jon Smirl <jonsmirl@xxxxxxxxx> > Jon> --- > Jon> sound/soc/fsl/Kconfig | 8 +++ > Jon> sound/soc/fsl/Makefile | 1 > Jon> sound/soc/fsl/efika-audio-fabric.c | 95 ++++++++++++++++++++++++++++++++++++ > Jon> 3 files changed, 104 insertions(+), 0 deletions(-) > Jon> create mode 100644 sound/soc/fsl/efika-audio-fabric.c > > Jon> diff --git a/sound/soc/fsl/Kconfig b/sound/soc/fsl/Kconfig > Jon> index 79579ae..f571c6e 100644 > Jon> --- a/sound/soc/fsl/Kconfig > Jon> +++ b/sound/soc/fsl/Kconfig > Jon> @@ -47,3 +47,11 @@ config SND_MPC52xx_SOC_PCM030 > Jon> help > Jon> Say Y if you want to add support for sound on the Phytec pcm030 baseboard. > > Jon> +config SND_MPC52xx_SOC_EFIKA > Jon> + tristate "SoC AC97 Audio support for bbplan Efika and STAC9766" > Jon> + depends on PPC_EFIKA > Jon> + select SND_SOC_MPC5200_AC97 > Jon> + select SND_SOC_STAC9766 > Jon> + help > Jon> + Say Y if you want to add support for sound on the Efika. > Jon> + > > Wouldn't it make more sense to make this default y when it has such > specific dependencies and is so deep down in the tree - Most efika > users probably want to enable this if they have enabled ALSA and > SND_SOC? I can change it in the next round of updates. Right now I'd like to get some people testing it and maybe doing some patches to enhance it. For example I know he code has a problem where about 5% of the time the codec doesn't reset right on boot. Someone needs to put an oscilloscope on the codec chip and tell me why it is failing. > > -- > Bye, Peter Korsgaard > -- Jon Smirl jonsmirl@xxxxxxxxx _______________________________________________ Alsa-devel mailing list Alsa-devel@xxxxxxxxxxxxxxxx http://mailman.alsa-project.org/mailman/listinfo/alsa-devel
