At Fri, 22 May 2009 16:46:13 +0200,
Raphaël Doursenaud wrote:
>
> -----BEGIN PGP SIGNED MESSAGE-----
> Hash: SHA1
>
> From: Raphaël Doursenaud <rdoursenaud@xxxxxxx>
>
> Correct firmware path to reflect actual location.
> This was causing hotplug to fail.
The firmware files of hdsp are actually located without "hdsploader/"
path but directly in /lib/firmware as default. Is it different on your
systems?
thanks,
Takashi
> Inspired by the emu10k1 module.
>
> Signed-off-by: Raphael Doursenaud <rdoursenaud@xxxxxxx>
> - ---
> sound/pci/rme9652/hdsp.c | 22 ++++++++++++++--------
> 1 files changed, 14 insertions(+), 8 deletions(-)
>
> diff --git a/sound/pci/rme9652/hdsp.c b/sound/pci/rme9652/hdsp.c
> index 314e735..48f5434 100644
> - --- a/sound/pci/rme9652/hdsp.c
> +++ b/sound/pci/rme9652/hdsp.c
> @@ -59,11 +59,17 @@ MODULE_LICENSE("GPL");
> MODULE_SUPPORTED_DEVICE("{{RME Hammerfall-DSP},"
> "{RME HDSP-9652},"
> "{RME HDSP-9632}}");
> +
> +#define MULTIFACE_FILENAME "hdsploader/multiface_firmware.bin"
> +#define MULTIFACE_REV11_FILENAME "hdsploader/multiface_firmware_rev11.bin"
> +#define DIGIFACE_FILENAME "hdsploader/digiface_firmware.bin"
> +#define DIGIFACE_REV11_FILENAME "hdsploader/digiface_firmware_rev11.bin"
> +
> #ifdef HDSP_FW_LOADER
> - -MODULE_FIRMWARE("multiface_firmware.bin");
> - -MODULE_FIRMWARE("multiface_firmware_rev11.bin");
> - -MODULE_FIRMWARE("digiface_firmware.bin");
> - -MODULE_FIRMWARE("digiface_firmware_rev11.bin");
> +MODULE_FIRMWARE(MULTIFACE_FILENAME);
> +MODULE_FIRMWARE(MULTIFACE_REV11_FILENAME);
> +MODULE_FIRMWARE(DIGIFACE_FILENAME);
> +MODULE_FIRMWARE(DIGIFACE_REV11_FILENAME);
> #endif
>
> #define HDSP_MAX_CHANNELS 26
> @@ -4928,15 +4934,15 @@ static int hdsp_request_fw_loader(struct hdsp *hdsp)
> switch (hdsp->io_type) {
> case Multiface:
> if (hdsp->firmware_rev == 0xa)
> - - fwfile = "multiface_firmware.bin";
> + fwfile = MULTIFACE_FILENAME;
> else
> - - fwfile = "multiface_firmware_rev11.bin";
> + fwfile = MULTIFACE_REV11_FILENAME;
> break;
> case Digiface:
> if (hdsp->firmware_rev == 0xa)
> - - fwfile = "digiface_firmware.bin";
> + fwfile = DIGIFACE_FILENAME;
> else
> - - fwfile = "digiface_firmware_rev11.bin";
> + fwfile = DIGIFACE_REV11_FILENAME;
> break;
> default:
> snd_printk(KERN_ERR "Hammerfall-DSP: invalid io_type %d\n",
> hdsp->io_type);
> - --
> Raphaël Doursenaud
>
> -----BEGIN PGP SIGNATURE-----
> Version: GnuPG v1.4.9 (GNU/Linux)
> Comment: Using GnuPG with Mozilla - http://enigmail.mozdev.org
>
> iEYEARECAAYFAkoWurIACgkQaZKmNAdXaVVYYACdEyheX1+7sUbWURScDRFV66XV
> s4gAniZHnEfwRG012ZQmaDAhDhNXQf9Z
> =Ex8j
> -----END PGP SIGNATURE-----
>
_______________________________________________
Alsa-devel mailing list
Alsa-devel@xxxxxxxxxxxxxxxx
http://mailman.alsa-project.org/mailman/listinfo/alsa-devel
