At Mon, 18 May 2009 16:44:06 +0800, Karthik Ramgopal wrote: > > Nothing seems to change after doing that also. Situation is same as before. > Though I noticed that the values of the init_pin_config was different from the > one I specified. Did you reconfigure? Then init_pin_config should be overridden after that. > Need to still execute SET_EAPD_BTLENABLE 2 on 0x15 to fire up the amps It's a known issue as I mentioned. Takashi > Regards, > Karthik > > On Mon, May 18, 2009 at 2:57 PM, Takashi Iwai <tiwai@xxxxxxx> wrote: > > At Mon, 18 May 2009 14:44:48 +0800, > Karthik Ramgopal wrote: > > > > Hi, > > Here is a list of ALC889 verbs for the 6920/6935 series of > laptops. I > > got this from someone who has got the audio subsystem fully working > (jack > > sensing+proper mapping+mic+SPDIF) with Mac OS X. > > > > NID 17 [Jack] Digital Out at Int HDMI > > Node - 0x11 > > Pin Default - 0x18561130 > > Verb - 01171C30 01171D11 01171E56 01171F18 > > > > NID 18 [Fixed] Mic at Int ATAPI > > Node 0x12 > > Pin Default - 0x99a3094e > > Verb - 01271C4E 01271D09 01271EA3 01271F99 > > > > NID 20 [Fixed] Speaker at Int ATAPI > > Node - 0x14 > > Pin Default - 0x99130110 > > Verb - 01471C10 01471D01 01471E13 01471F99 > > > > NID 21 [Jack] HP Out at Ext Front > > Node - 0x15 > > Pin Default - 0x0221101f > > Verb - 01571C1F 01571D10 01571E21 01571F02 > > > > NID 22 [N/A] Speaker at Ext Rear > > Node - 0x16 > > Pin Default - 0x411111f0 > > Verb - 01671CF0 01671D11 01671E11 01671F41 > > > > NID 23 [N/A] Speaker at Ext Rear > > Node - 0x17 > > Pin Default - 0x411111f0 > > Verb - 01771CF0 01771D11 01771E11 01771F41 > > > > NID 24 [Jack] Mic at Ext Front > > Node - 0x18 > > Pin Default - 0x02a19c40 > > Verb - 01871C40 01871D9C 01871EA1 01871F02 > > > > NID 25 [N/A] Speaker at Ext Rear > > Node - 0x19 > > Pin Default - 0x411111f0 > > Verb - 01971CF0 01971D11 01971E11 01971F41 > > > > NID 26 [Jack] Line In at Ext Front > > Node - 0x1A > > Pin Default - 0x02813441 > > Verb - 01A71C41 01A71D34 01A71E81 01A71F02 > > > > NID 27 [N/A] Speaker at Ext Rear > > Node - 0x1B > > Pin Default - 0x411111f0 > > Verb - 01B71CF0 01B71D11 01B71E11 01B71F41 > > > > NID 28 [N/A] Speaker at Ext Rear > > Node - 0x1C > > Pin Default - 0x411111f0 > > Verb - 01C71CF0 01C71D11 01C71E11 01C71F41 > > > > NID 29 [N/A] Speaker at Ext Rear > > Node - 0x1D > > Pin Default - 0x4016852d > > Verb - 01D71C2D 01D71D85 01D71E16 01D71F40 > > > > NID 30 [Jack] SPDIF Out at Ext Front > > Node - 0x1E > > Pin Default - 0x02451120 > > Verb - 01E71C20 01E71D11 01E71E45 01E71F02 > > > > NID 31 [N/A] Speaker at Ext Rear > > Node - 0x1F > > Pin Default - 0x411111f0 > > Verb - 01F71CF0 01F71D11 01F71E11 01F71F41 > > > > Any use of these? > > Set model=auto, try to write all these values to > /sys/class/sound/hwC0D*/user_pin_configs as root, such as > # echo 0x11 0x18561130 > /sys/class/sound/hwC0D0/user_pin_configs > > Then write 1 to /sys/class/sound/hwC0D*/reconfig. It'll reconfigure > the setup according to the new pin configuration. > The EAPD setting might be still missing, though. > > Takashi > > _______________________________________________ Alsa-devel mailing list Alsa-devel@xxxxxxxxxxxxxxxx http://mailman.alsa-project.org/mailman/listinfo/alsa-devel
