Karl Beldan wrote: > Make sure we are in a know good state at end of probe : > Reset FIFO logic and registers, and make sure REC and RPL functions > along with FIFO service are disabled (SACR0_RST enables REC and RPL). > > Resetting loses current settings so remove reset from stream startup. > Now reset occurs only at probe. > This differs from what you applied in that it includes 'removal of hw reset from pxa2xx_i2s_startup'. I understood including it in either one (1/4 or 2/4) is ok, since you had not pushed it yet. Otherwise I'll have to post a [PATCH 2/4 v3] including the reset, which would be identical to [PATCH 2/4] (initial version). If I understand correctly from your replies, I should have posted [PATCH 1/4 v2]'s content with [PATCH 1/4 v3]'s Subject. Thanks, -- Karl _______________________________________________ Alsa-devel mailing list Alsa-devel@xxxxxxxxxxxxxxxx http://mailman.alsa-project.org/mailman/listinfo/alsa-devel
