On Monday 11 May 2009 15:03:20 ext Jarkko Nikula wrote:
> On Mon, 11 May 2009 14:14:25 +0300
>
> Peter Ujfalusi <peter.ujfalusi@xxxxxxxxx> wrote:
> > This patch fixes the - agressive - 'tuck' sound heard when
> > the codec goes to standby mode.
> >
> > We need to wait for the ramp down completion in case of
> > headsetl_event:POST_PMD.
>
> For my ears this sounds that the power-down pop is now even worse. I'm
> listening with some 32 ohm headphones connected into Beagle.
>
> Before it was kind of sharp snap but now it is snap + low-frequency
> tuck/pop. Positive that this low-frequency pop sounds kind of same than
> the power-up pop so there is now ramp in both events when coupling
> capasitor is charging/discharging.
>
> Do you know is the capacitor coupling configuration correct? TPS65950
> is mentioning it but I don't find it at quick look where to configure it
> for ac-coupled connection.
Jarkko and others: can you test this on top of the my patch?
How does the 'tuck' sounds after this?
diff --git a/sound/soc/soc-dapm.c b/sound/soc/soc-dapm.c
index 7847f80..f930fbc 100644
--- a/sound/soc/soc-dapm.c
+++ b/sound/soc/soc-dapm.c
@@ -61,7 +61,7 @@ static int dapm_up_seq[] = {
static int dapm_down_seq[] = {
snd_soc_dapm_pre, snd_soc_dapm_adc, snd_soc_dapm_hp, snd_soc_dapm_spk,
- snd_soc_dapm_pga, snd_soc_dapm_mixer_named_ctl, snd_soc_dapm_mixer,
+ snd_soc_dapm_mixer_named_ctl, snd_soc_dapm_mixer, snd_soc_dapm_pga,
snd_soc_dapm_dac, snd_soc_dapm_mic, snd_soc_dapm_micbias,
snd_soc_dapm_mux, snd_soc_dapm_value_mux, snd_soc_dapm_supply,
snd_soc_dapm_post
--
Péter
_______________________________________________
Alsa-devel mailing list
Alsa-devel@xxxxxxxxxxxxxxxx
http://mailman.alsa-project.org/mailman/listinfo/alsa-devel
