I am using the gigabyte MA78GM-US2H motherboard. it has the ALC889A audio.
I am trying 1.0.19 and audio works out the analog back port but not over
HDMI.
Codec: Realtek ALC889A
Address: 0
Function Id: 0x1
<--------------------------------- this is different
Vendor Id: 0x10ec0885
Subsystem Id: 0x1458a002
Revision Id: 0x100101
No Modem Function Group found
Default PCM:
rates [0x560]: 44100 48000 96000 192000
bits [0xe]: 16 20 24
formats [0x1]: PCM
Default Amp-In caps: N/A
Default Amp-Out caps: N/A
GPIO: io=2, o=0, i=0, unsolicited=1, wake=0
IO[0]: enable=0, dir=0, wake=0, sticky=0, data=0, unsol=0
IO[1]: enable=0, dir=0, wake=0, sticky=0, data=0, unsol=0
Node 0x02 [Audio Output] wcaps 0x11: Stereo
Converter: stream=0, channel=0
PCM:
rates [0x560]: 44100 48000 96000 192000
bits [0xe]: 16 20 24
formats [0x1]: PCM
Node 0x03 [Audio Output] wcaps 0x11: Stereo
I have been looking but havent found a solution yet. I tried grabbing
the snapshot tar ball for today but I get errors on the compile.
I had a similiar motherboard but it does not report Function ID: 01 : -
HDMI audio on this board works correctly.
Codec: Realtek ALC889A
Address: 0
Vendor Id: 0x10ec0885
Subsystem Id: 0x1458a002
Revision Id: 0x100101
No Modem Function Group found
Default PCM:
rates [0x560]: 44100 48000 96000 192000
Any thoughts????
Jerry
_______________________________________________
Alsa-devel mailing list
Alsa-devel@xxxxxxxxxxxxxxxx
http://mailman.alsa-project.org/mailman/listinfo/alsa-devel
