On Tue, 14 Apr 2009 09:45:30 +0200 "Ujfalusi Peter (Nokia-D/Tampere)" <peter.ujfalusi@xxxxxxxxx> wrote: > Use correct DSP_B mode configuration for omap-mcbsp. > > Signed-off-by: Peter Ujfalusi <peter.ujfalusi@xxxxxxxxx> > --- > sound/soc/omap/omap-mcbsp.c | 2 +- > 1 files changed, 1 insertions(+), 1 deletions(-) > > diff --git a/sound/soc/omap/omap-mcbsp.c b/sound/soc/omap/omap-mcbsp.c > index 9c09b94..4440bab 100644 > --- a/sound/soc/omap/omap-mcbsp.c > +++ b/sound/soc/omap/omap-mcbsp.c > @@ -283,7 +283,7 @@ static int omap_mcbsp_dai_hw_params(struct > snd_pcm_substream *substream, break; > case SND_SOC_DAIFMT_DSP_B: > regs->srgr2 |= FPER(wlen * channels - 1); > - regs->srgr1 |= FWID(wlen * channels - 2); > + regs->srgr1 |= FWID(0); > break; > } Grr, I have some practical problems with my Beagle refusing to mount my SD card root but I give a test when I get it working. But I fear this change makes it into DSP_B with inverted FS polarity. Register srgr1 defines the FS length and it's active low. I think this will be correct if you switch the polarity in omap_mcbsp_dai_set_dai_fmt. At least defining pulse witdth with FWID(0) is more clear than FWID (wlen * channels - 2) :-) Jarkko _______________________________________________ Alsa-devel mailing list Alsa-devel@xxxxxxxxxxxxxxxx http://mailman.alsa-project.org/mailman/listinfo/alsa-devel
