>From the pxa27x developers manual, Table 8-8 SSPSP Bit Definitions: SCMODE(0): Data Driven (Falling), Data Sampled (Rising), Idle State (Low) SCMODE(1): Data Driven (Rising), Data Sampled (Falling), Idle State (Low) SCMODE(2): Data Driven (Rising), Data Sampled (Falling), Idle State (High) SCMODE(3): Data Driven (Falling), Data Sampled (Rising), Idle State (High) SCMODE(3) does not invert the clock polarity compared to the default SCMODE(0). This patch also adds all possible NF/IF, NB/IB combinations to the DSP_A and DSP_B modes. Signed-off-by: Daniel Ribeiro <drwyrm@xxxxxxxxx> --- sound/soc/pxa/pxa-ssp.c | 11 ++++++++++- 1 files changed, 10 insertions(+), 1 deletions(-) diff --git a/sound/soc/pxa/pxa-ssp.c b/sound/soc/pxa/pxa-ssp.c index 308a657..6768e4e 100644 --- a/sound/soc/pxa/pxa-ssp.c +++ b/sound/soc/pxa/pxa-ssp.c @@ -568,7 +568,10 @@ static int pxa_ssp_set_dai_fmt(struct snd_soc_dai *cpu_dai, case SND_SOC_DAIFMT_NB_IF: break; case SND_SOC_DAIFMT_IB_IF: - sspsp |= SSPSP_SCMODE(3); + sspsp |= SSPSP_SCMODE(2); + break; + case SND_SOC_DAIFMT_IB_NF: + sspsp |= SSPSP_SCMODE(2) | SSPSP_SFRMP; break; default: return -EINVAL; @@ -585,7 +588,13 @@ static int pxa_ssp_set_dai_fmt(struct snd_soc_dai *cpu_dai, case SND_SOC_DAIFMT_NB_NF: sspsp |= SSPSP_SFRMP; break; + case SND_SOC_DAIFMT_NB_IF: + break; case SND_SOC_DAIFMT_IB_IF: + sspsp |= SSPSP_SCMODE(2); + break; + case SND_SOC_DAIFMT_IB_NF: + sspsp |= SSPSP_SCMODE(2) | SSPSP_SFRMP; break; default: return -EINVAL; -- tg: (577c9c4..) asoc/pxa-ssp-invert-clock.patch (depends on: master) total: 0 errors, 0 warnings, 24 lines checked asoc-pxa-ssp-invert-clock.patch has no obvious style problems and is ready for submission. _______________________________________________ Alsa-devel mailing list Alsa-devel@xxxxxxxxxxxxxxxx http://mailman.alsa-project.org/mailman/listinfo/alsa-devel
