On Tuesday 07 April 2009 08:45:36 Nikula Jarkko (Nokia-D/Helsinki) wrote: > On Mon, 6 Apr 2009 14:19:26 +0200 > > "Ujfalusi Peter (Nokia-D/Tampere)" <peter.ujfalusi@xxxxxxxxx> wrote: > > As an example, the board file for Beagle is modified to add support > > for stereo and TDM mode depending on the stream's channel count, so > > the stereo and the four channel mode are supported on Beagle. > > Peter, before starting to hack on this, did I interpret TWL block > diagram correctly so that I can route both R1/R2 and L1/L2 into same > outputs? It seems that only codec outputs available in Beagle are the > HSOL and HSOR. There seems to be no test pads for PreDriv and IHF > outputs. With the current implementation there is a mux on Headset outputs: 'HeadsetL Mux': Off, DACL1, DACL2 'HeadsetR Mux': Off, DACR1, DACR2 So you can select which Left channel (Channel 1 or 2 in TDM) goes to HSOL and which Right channel (channel 3 or 4 in TDM) goes to HSOR. In i2s/stereo mode the codec receives the data on DACL2/DACR2. I have been misled by the TRM on these, since it seams that these can be mixed on the output (and not muxes, as they are implemented at the moment). There has been proposed patches sent to alsa-devel some time ago, which fixed these mistakes... > > > Jarkko -- Péter _______________________________________________ Alsa-devel mailing list Alsa-devel@xxxxxxxxxxxxxxxx http://mailman.alsa-project.org/mailman/listinfo/alsa-devel
