This patch will enable the AC97C before resetting the external codec, leaving the AC97C disabled will result in floating I/O lines that can affect the reset procedure. Signed-off-by: Hans-Christian Egtvedt <hans-christian.egtvedt@xxxxxxxxx> --- sound/atmel/ac97c.c | 14 +++++++------- 1 files changed, 7 insertions(+), 7 deletions(-) diff --git a/sound/atmel/ac97c.c b/sound/atmel/ac97c.c index 7c7521b..75100b0 100644 --- a/sound/atmel/ac97c.c +++ b/sound/atmel/ac97c.c @@ -730,17 +730,17 @@ static bool filter(struct dma_chan *chan, void *slave) static void atmel_ac97c_reset(struct atmel_ac97c *chip) { - ac97c_writel(chip, MR, AC97C_MR_WRST); + ac97c_writel(chip, MR, 0); + ac97c_writel(chip, MR, AC97C_MR_ENA); + ac97c_writel(chip, CAMR, 0); + ac97c_writel(chip, COMR, 0); if (gpio_is_valid(chip->reset_pin)) { gpio_set_value(chip->reset_pin, 0); /* AC97 v2.2 specifications says minimum 1 us. */ - udelay(10); + udelay(2); gpio_set_value(chip->reset_pin, 1); } - - udelay(1); - ac97c_writel(chip, MR, AC97C_MR_ENA); } static int __devinit atmel_ac97c_probe(struct platform_device *pdev) @@ -826,6 +826,8 @@ static int __devinit atmel_ac97c_probe(struct platform_device *pdev) snd_card_set_dev(card, &pdev->dev); + atmel_ac97c_reset(chip); + /* Enable overrun interrupt from codec channel */ ac97c_writel(chip, COMR, AC97C_CSR_OVRUN); ac97c_writel(chip, IER, ac97c_readl(chip, IMR) | AC97C_SR_COEVT); @@ -836,8 +838,6 @@ static int __devinit atmel_ac97c_probe(struct platform_device *pdev) goto err_ac97_bus; } - atmel_ac97c_reset(chip); - retval = atmel_ac97c_mixer_new(chip); if (retval) { dev_dbg(&pdev->dev, "could not register ac97 mixer\n"); -- 1.5.6.3 _______________________________________________ Alsa-devel mailing list Alsa-devel@xxxxxxxxxxxxxxxx http://mailman.alsa-project.org/mailman/listinfo/alsa-devel