At Fri, 20 Mar 2009 19:56:40 +0100, Andreas Mohr wrote: > > Hi, > > On Wed, Mar 18, 2009 at 10:19:53AM +0100, Takashi Iwai wrote: > > At Wed, 18 Mar 2009 10:05:07 +0100, > > Andreas Mohr wrote: > > > > > > Hi, > > > > > > On Tue, Mar 17, 2009 at 09:32:16PM +0100, Takashi Iwai wrote: > > > > Don't use -Dplughw:0. Then the default setup will be used. > > > > > > > > % arecord -fdat -c1 test.wav > > > > > > Tried that, didn't help. /usr/share/alsa/cards/HDA-Intel.conf still > > > contains the patch, but equal Capture Volume sliders still silenced > > > audio input, whereas non-equal worked. Hmm. > > > > What is the output with -v option? > > Sorry for the delay! > > $ arecord -fdat -c1 -v test.wav; aplay test.wav > Recording WAVE 'test.wav' : Signed 16 bit Little Endian, Rate 48000 Hz, Mono > ALSA <-> PulseAudio PCM I/O Plugin > Its setup is: > stream : CAPTURE > access : RW_INTERLEAVED > format : S16_LE > subformat : STD > channels : 1 > rate : 48000 > exact rate : 48000 (48000/1) > msbits : 16 > buffer_size : 24000 > period_size : 6000 > period_time : 125000 > tstamp_mode : NONE > period_step : 1 > avail_min : 6000 > period_event : 0 > start_threshold : 1 > stop_threshold : 24000 > silence_threshold: 0 > silence_size : 0 > boundary : 1572864000 > ^CAborted by signal Interrupt... > Playing WAVE 'test.wav' : Signed 16 bit Little Endian, Rate 48000 Hz, Mono > andi@andinet:/tmp$ > > > Hmm. Note the pulseaudio stuff above... Yes, that's the very reason. If you don't PA and avoid the default configuration override (e.g. defined in /etc/asound.conf) my patch should work. Takashi _______________________________________________ Alsa-devel mailing list Alsa-devel@xxxxxxxxxxxxxxxx http://mailman.alsa-project.org/mailman/listinfo/alsa-devel
