Hi Mark, On Fri, Mar 13, 2009 at 02:37:24PM +0000, Mark Brown wrote: > I worked a bit on the PXA SSP code last night and was able to come up > with a configuration which uses non-network mode for I2S and works well > on the Zylonite. I'll post the current series I have in a followup to > this, if you could take a look that'd be great - I haven't yet worked > through all the testing I'd like to do. > > Unfortunately it's going to have broken Daniel's configuration since I > inverted the sense of LRCLK as the chip seemed not to generate an LRCLK > with a non-zero frame delay; I need to check to see if this is just > something I've overlooked. Hopefully Daniel's system should just have > inverted the left and right channels. I can confirm that my board still works with your latest patches, so I'm fine with your changes :) And indeed - the channels were inverted, I didn't check that before as it wasn't my greatest concern ... Thanks, Daniel _______________________________________________ Alsa-devel mailing list Alsa-devel@xxxxxxxxxxxxxxxx http://mailman.alsa-project.org/mailman/listinfo/alsa-devel
