Clemens Ladisch wrote:
> Christopher J. Atherton wrote:
>> I have an HT Omega Claro Halo (CMI8878) card that is not entirely
>> working. This card has two analog outputs, a pair of RCA connectors and
>> also a separate headphone output (3.5mm jack). The RCA outputs work,
>> but the headphone output, which notably passes a signal from a built in
>> headphone amp, does not.
>
> Please try this patch:
>
> --- linux/sound/pci/oxygen/oxygen.c
> +++ linux/sound/pci/oxygen/oxygen.c
> @@ -200,6 +200,8 @@ static void halo_init(struct oxygen *chip)
> {
> ak4396_init(chip);
> ak5385_init(chip);
> + oxygen_set_bits16(chip, OXYGEN_GPIO_CONTROL, 0x100);
> + oxygen_set_bits16(chip, OXYGEN_GPIO_DATA, 0x100);
> }
>
> static void generic_cleanup(struct oxygen *chip)
That did the trick. Many thanks! However, I've now noticed that the
PCM volume control doesn't work at all, which is somewhat inconvenient
since the card is very loud and Master only makes my 64 ohm headphones
comfortable at "5" (-25 dB).
-- Kristoff
_______________________________________________
Alsa-devel mailing list
Alsa-devel@xxxxxxxxxxxxxxxx
http://mailman.alsa-project.org/mailman/listinfo/alsa-devel
