On Thu, Mar 05, 2009 at 11:21:33AM +0000, Mark Brown wrote: > > > Shouldn't this be somehow set by set_dai_clkdiv instead? > > > This is actually a very common case - MCLK is BCLK*4, so I put it here. > > We could still move it to some more configurable place if it turns out > > we need to configure it per board. > > It's a common option but far from universal - apart from anything else > normally the MCLK requirement is a multiple of the sampling frequency > rather than the bitclock rate so the ratio with BCLK will often vary > with sample size. I've seen devices able to operate as low as 64fs and > IIRC I've seen things up to 512fs, though 256fs is more common. Ok, agreed. I moved that to my board file (using DIV_SCR) and will drop that piece in the next patches. Daniel _______________________________________________ Alsa-devel mailing list Alsa-devel@xxxxxxxxxxxxxxxx http://mailman.alsa-project.org/mailman/listinfo/alsa-devel
