At Sat, 14 Feb 2009 17:13:55 -0200, Herton Ronaldo Krzesinski wrote: > > On Saturday 14 February 2009 08:24:15 Takashi Iwai wrote: > > At Fri, 13 Feb 2009 14:22:00 -0500, > > Tim Barnette wrote: > > > > > > ..And it worked! I now have sound! Can you tell me what I actually did here? > > > > The problem was that your BIOS didn't set the correct default pin > > configuration. The driver doesn't know which pin should be used for > > the speaker output, as a consequence, it's set as INPUT. > > Now you set it OUTPUT manually by hda-verb, and (fortunately) the > > route to that pin was alive even though it wasn't declared, you get > > the speaker output now. > > > > The next step is to implement a proper pin-config to override by > > the driver. This won't be much work, but hey, wait for a while. > > > > (Or, did Herton already work on that?) > > I had added before pin configs for which source came from *.ini files of IDT > windows drivers provided by HP. But I don't know if they are at all necessary, > may be just setting config of 0x0d pin should suffice for all hp-dv5 models, > as all of them have speaker on 0x0d from all reports and also looking at the > *.ini files. > > I have three patches, you can choose one of them :), see attached. The first > one is my previous pin configs work "let's set for all cases the pin configs > based on *.ini files", the others are same smaller change/less intrusive that > instead just deals with this hp dv4 case. I took the last, the smallest one. It's not too bad to define all models, but at this stage, I'd like rather to slim the code down. Thanks! Takashi _______________________________________________ Alsa-devel mailing list Alsa-devel@xxxxxxxxxxxxxxxx http://mailman.alsa-project.org/mailman/listinfo/alsa-devel
