Dnia 2009-02-14, sob o godzinie 11:30 +0100, Takashi Iwai pisze:> At Fri, 13 Feb 2009 22:48:26 +0100,> Bartłomiej Holdenmayer wrote:> > > > Dnia 2009-02-13, pią o godzinie 09:03 +0100, Takashi Iwai pisze:> > > At Fri, 13 Feb 2009 07:58:44 +0100,> > > I wrote:> > > > > > > > At Fri, 13 Feb 2009 04:37:54 +0100,> > > > Bartłomiej Holdenmayer wrote:> > > > > > > > > > Dnia 2009-02-11, śro o godzinie 08:48 +0100, Takashi Iwai pisze:> > > > > > At Wed, 11 Feb 2009 03:20:44 +0100,> > > > > > Bartłomiej Holdenmayer wrote:> > > > > > > > > > > > > > Welcome,> > > > > > > I have no sound through HDMI.> > > > > > > I have Nvidia Geforce 9200M GS with 180.11 driver. Alsa 1.0.19. And> > > > > > > newest bios F13A. > > > > > > > > > > > > > > I was googling for a week and only solution i found was to upgrade Alsa> > > > > > > and Nvidia to the newest version. I did, but i still do not have sound> > > > > > > over HDMI. In Win$ it is working ok.> > > > > > > > > > > > > > http://www.alsa-project.org/db/?f=01be9175263a5021fcfef3a47123afc04d62a863> > > > > > > > > > > > Try the very latest alsa-driver snapshot below:> > > > > > ftp://ftp.kernel.org/pub/linux/kernel/people/tiwai/snapshot/alsa-driver-snapshot.tar.gz> > > > > > > > > > > > > > > > > > Takashi> > > > > > > > > > I have now the newest nvidia 180.29 from 11.02.09. I have alsa snapshot.> > > > > Still sound does not work over hdmi.> > > > > > > > Well, then the last suspect is BIOS.> > > > > > BTW, the very latest alsa-driver snapshot includes a new feature to> > > force the codec probing. Grab the latest one and try probe_mask=0x1ff> > > option. You'll have to see some new messages> > > hda_intel: codec_mask forced to 0xff> > > > > > Takashi> > > _______________________________________________> > > Alsa-devel mailing list> > > Alsa-devel@xxxxxxxxxxxxxxxx> > > http://mailman.alsa-project.org/mailman/listinfo/alsa-devel> > > > Can You please tell me what exactly should I do?> > Well, just like what I wrote in the above: grab the latest alsa-driver> snapshot tarball, build it, install it, and add probe_mask=0x1ff> module option to snd-hda-intel, then load it. If you've done it> properly, you see the message like above. And let's see whether the> driver can detect more codecs.> > > Takashi> _______________________________________________> Alsa-devel mailing list> Alsa-devel@xxxxxxxxxxxxxxxx> http://mailman.alsa-project.org/mailman/listinfo/alsa-devel I am not sure if do everything properly. 1. I did installation of alsa snap with scriptAlsaUpgrade-1.0.x-rev-1.16.sh; 2. After that, I changed last line in /etc/modprobe.d/alsa-base from:options snd-hda-intel enable_msi=1 into:options snd-hda-intel enable_msi=1 probe_mask=0x1ff 3. After I restarted alsa with /etc/init.d/alsasound stop and/etc/init.d/alsasound start and get message:Starting sound driver: snd-hda-intel done Am I doing that properly? What should I do (what command) to see hda_intel: codec_mask forced to 0xff -- Pozdrawiam / RegardsBartłomiej Holdenmayer GG:541634; ICQ:33920811; skypename:bartlomiejholdenmayer _______________________________________________Alsa-devel mailing listAlsa-devel@xxxxxxxxxxxxxxxxxxxx://mailman.alsa-project.org/mailman/listinfo/alsa-devel
