At Mon, 09 Feb 2009 18:24:57 +0100, I wrote: > > At Mon, 9 Feb 2009 17:18:59 +0000 (UTC), > aeleneski@xxxxxxxxxxx wrote: > > > > Thanks for your time and all these suggestions. Still no luck though. > > > > Seems like you might not be able to have two files ending in alsa-base in > > the /etc/modprobe.d/ folder. That was the reason for the orange speaker > > indicator. I had > > alsa-base and backup-alsa-base, for some reason it was grabbing the settings > > from the backup. > > Ah, yes, module-init-tools doesn't check every backup file suffix. > Better to remove completely old files. > > > Anyway, with probe only, orange sound indicator, when doing aplay -l I get > > > > **** List of PLAYBACK Hardware Devices **** > > card 1: HDMI [HDA ATI HDMI], device 3: ATI HDMI [ATI HDMI] > > Subdevices: 1/1 > > Subdevice #0: subdevice #0 > > With probe_only option, it doesn't make sense to run aplay. This > option basically means "probe codecs but don't set up for use yet". > This is useful to check the raw setup by BIOS before overriding or > modifying by the driver. > > One thing we can try is to add the pin config dynamically then > reconfigure. For example, load the driver with probe_only=1, then > do the following as root: > > echo 0x0d 0x71c 0x10 > /sys/class/sound/hwC0D0/init_verbs > echo 0x0d 0x71d 0x11 > /sys/class/sound/hwC0D0/init_verbs > echo 0x0d 0x71e 0x17 > /sys/class/sound/hwC0D0/init_verbs > echo 0x0d 0x71f 0x90 > /sys/class/sound/hwC0D0/init_verbs The above might be not suffice to give the initialization before the parser. Try to call hda-verb like the following instead: hda-verb /dev/snd/hwC0D0 0x0d 0x71c 0x10 hda-verb /dev/snd/hwC0D0 0x0d 0x71d 0x11 hda-verb /dev/snd/hwC0D0 0x0d 0x71e 0x17 hda-verb /dev/snd/hwC0D0 0x0d 0x71f 0x90 then echo 1 > /sys/class/sound/hwC0D0/reconfig Takashi _______________________________________________ Alsa-devel mailing list Alsa-devel@xxxxxxxxxxxxxxxx http://mailman.alsa-project.org/mailman/listinfo/alsa-devel
