At Mon, 2 Feb 2009 12:01:08 -0500, Tim Barnette wrote: > > [1 <text/plain; ISO-8859-1 (7bit)>] > > [2 <text/html; ISO-8859-1 (quoted-printable)>] > Thanks, a few more questions.. sorry I don't understand most of this.. > 1) hda-verb - I can't find this.. what is it? Where do I run it? See Documentation/sound/alsa/HD-Audio.txt in the recent linux tree, or ftp://ftp.kernel.org/pub/linux/kernel/people/tiwai/docs/HD-Audio.pdf > 2) Inside of the snapshot, there are three steps (6, 7,8 below) that I need > help with.. The installation step for the snapshot tarball is identical with the released version. If you installed already alsa-driver tarball, do it just in the same way. If you haven't done it yet, just do the following four steps: % ./configure --with-debug=full --enable-dynamic-minors % make % su # make install-modules Takashi > 6 - i already have /dev/snd with some stuff in it... so, I won't run this > step.. > 7 - edit it to do what? > 8 - I dont know the name of my card.. > > 6) Run the './snddevices' script to create new sound devices in /dev > directory. > Skip this step, if you have already /dev/snd/* files, or if you're > using a DEVFS or udev. > > 7) Edit your kernel module config (either /etc/modprobe.conf or > /etc/modules.conf, depending on the kernel version). If you are not > sure, what to do, you may try the alsaconf script available in > the alsa-utils package. > > 8) Run 'modprobe snd-xxxx' where xxxx is the name of your card. > Note: All ALSA ISA drivers support ISA PnP natively, so you don't need > isapnptools any more. Don't use both together. It will > conflict. For disabling the ALSA ISA PnP support, specify > --with-isapnp=no configure switch. > > On Mon, Feb 2, 2009 at 11:28 AM, Takashi Iwai <tiwai@xxxxxxx> wrote: > > At Mon, 2 Feb 2009 11:26:25 -0500, > Tim Barnette wrote: > > > > Thanks, Takashi. I tried installing the latest snapshot but wound up > > recompiling a bunch of stuff (which my box is not configured for)... Is > there > > an easy way to download and install the latest snapshot? > > ftp://ftp.kernel.org/pub/linux/kernel/people/tiwai/snapshot/ > alsa-driver-snapshot.tar.gz > > > Is there a way to fix the 0x0d widget? BIOS flash? laptop seems kind > of new > > for that... > > Try the hda-verb command first to check whether it's really an issue > of 0x0d. > > Takashi > > > > > On Mon, Feb 2, 2009 at 10:25 AM, Takashi Iwai <tiwai@xxxxxxx> wrote: > > > > At Mon, 2 Feb 2009 10:17:03 -0500, > > Tim Barnette wrote: > > > > > > Thanks, Takashi. I made this change and rebooted. > > > > > > I noticed right away the mute light is no longer on... but still > no > > sound > > > through speakers, only headphones.. > > > > > > /sys/module/snd_hda_intel/parameters/model > > > contains > > > hp-dv5,<NULL>,<NULL>,<NULL>,<NULL>,<NULL>,<NULL>,<NULL> > > > > > > attached is the alsa-info.txt you requested.. > > > > Did you try the latest alsa-driver snapshot? > > > > If it still doesn't work, I guess this is a BIOS problem. > > The other HP dv laptops show the widget 0x0d as the speaker while > > yours is unused. > > > > Try to run: > > hda-verb /dev/snd/hwC0D0 0x0d SET_PIN_WID 0x40 > > > > Takashi > > > > > > _______________________________________________ Alsa-devel mailing list Alsa-devel@xxxxxxxxxxxxxxxx http://mailman.alsa-project.org/mailman/listinfo/alsa-devel
