On Tuesday 20 January 2009 13:49, Diego E. 'Flameeyes' Pettenò wrote: > Jaroslav Kysela <perex@xxxxxxxx> writes: > > Do you have seen M-Audio Delta 1010 ? Or DMX6fire, or Hoontech/ST.Audio dsp2000, or rest of a list... It seems to me that only a few cut-down card versions have only 2 analogue in/out. > Still, as they are the devices are non-functional at least on my card, > and I'm ready to bet that the same would happen on the Delta 1010 given > that the number of channels is not coherent (you try to open surround71 > as 8-channels and it'll fail because this minimal card has 10; if the > 1010 has the same amount of channels, it'll still fail). Here (on a rather old Alsa version) on DMX6fire: aplay -Dfront try1.wav does fail unless try1.wav is a 10-channel file, whereupon just the first 2 channels play out. A standard stereo wav file fails with a sample format error. So there is something not quite right with the config files. Does the surround and front both need the asym slave.format & slave.channels definitions? Right now I can't do further testing; maybe later. Alan _______________________________________________ Alsa-devel mailing list Alsa-devel@xxxxxxxxxxxxxxxx http://mailman.alsa-project.org/mailman/listinfo/alsa-devel
