On Tue, Dec 16, 2008 at 2:36 AM, Takashi Iwai <tiwai@xxxxxxx> wrote: > At Tue, 16 Dec 2008 01:28:04 +0300, > Alexander Chemeris wrote: >> >> Sorry for mail burst... >> >> On Sun, Dec 14, 2008 at 12:17 PM, Takashi Iwai <tiwai@xxxxxxx> wrote: >> > At Sat, 13 Dec 2008 21:57:04 +0300, >> > Alexander Chemeris wrote: >> > Anyway, try to build with --debug=verbose configure option. Usually >> > you'll have a bit more messages. >> > At least, you'll get a message like "codec_mask = 0xxxx" at probing. >> > If the value is zero, it means that your hardware doesn't set the >> > codec slot bit, usually a BIOS issue. >> >> If I manually set codec_mask to 0xf I get following output: >> >> [ 634.273106] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, >> low) -> IRQ 22 >> [ 634.273133] HDA Intel 0000:00:1b.0: setting latency timer to 64 >> [ 634.273138] ALSA alsa-kernel/pci/hda/hda_intel.c:2216: chipset >> global capabilities = 0x4401 >> [ 634.304568] ALSA alsa-kernel/pci/hda/hda_intel.c:786: Overriding >> codecs probe mask >> [ 634.304574] ALSA alsa-kernel/pci/hda/hda_intel.c:793: codec_mask = 0xf >> [ 635.308511] ALSA alsa-kernel/pci/hda/hda_intel.c:633: hda_intel: >> azx_get_response timeout, switching to polling mode: last >> cmd=0x000f0000 >> [ 636.313617] ALSA alsa-kernel/pci/hda/hda_intel.c:1277: hda_intel: >> Codec #0 probe error; disabling it... >> [ 637.348012] ALSA alsa-kernel/pci/hda/hda_intel.c:1277: hda_intel: >> Codec #1 probe error; disabling it... >> [ 638.384508] ALSA alsa-kernel/pci/hda/hda_intel.c:1277: hda_intel: >> Codec #2 probe error; disabling it... >> [ 639.420508] ALSA alsa-kernel/pci/hda/hda_intel.c:1277: hda_intel: >> Codec #3 probe error; disabling it... >> [ 639.452023] ALSA alsa-kernel/pci/hda/hda_intel.c:786: Overriding >> codecs probe mask >> [ 639.452029] ALSA alsa-kernel/pci/hda/hda_intel.c:793: codec_mask = 0xf >> [ 640.456014] ALSA alsa-kernel/pci/hda/hda_intel.c:648: hda_intel: >> azx_get_response timeout, switching to single_cmd mode: last >> cmd=0x000f0000 >> [ 640.457380] ALSA alsa-kernel/pci/hda/hda_intel.c:706: hda-intel: >> get_response timeout: IRS=0x1 >> [ 640.458587] ALSA alsa-kernel/pci/hda/hda_intel.c:688: hda-intel: >> send_cmd timeout: IRS=0x1, val=0xf0001 >> [ 640.459641] ALSA alsa-kernel/pci/hda/hda_intel.c:688: hda-intel: >> send_cmd timeout: IRS=0x1, val=0xf0002 >> [ 640.460709] ALSA alsa-kernel/pci/hda/hda_intel.c:688: hda-intel: >> send_cmd timeout: IRS=0x1, val=0xf0004 >> [ 640.460716] ALSA >> /home/ipse/packages/alsa-git/alsa-driver/pci/hda/hda_codec.c:783: >> hda_codec: no AFG or MFG node found >> [ 640.462509] ALSA alsa-kernel/pci/hda/hda_intel.c:688: hda-intel: >> send_cmd timeout: IRS=0x1, val=0x100f0000 >> [ 640.463624] ALSA alsa-kernel/pci/hda/hda_intel.c:688: hda-intel: >> send_cmd timeout: IRS=0x1, val=0x100f0000 >> [ 640.464731] ALSA alsa-kernel/pci/hda/hda_intel.c:688: hda-intel: >> send_cmd timeout: IRS=0x1, val=0x100f0001 >> [ 640.465795] ALSA alsa-kernel/pci/hda/hda_intel.c:688: hda-intel: >> send_cmd timeout: IRS=0x1, val=0x100f0002 >> [ 640.466858] ALSA alsa-kernel/pci/hda/hda_intel.c:688: hda-intel: >> send_cmd timeout: IRS=0x1, val=0x100f0004 >> [ 640.466864] ALSA >> /home/ipse/packages/alsa-git/alsa-driver/pci/hda/hda_codec.c:783: >> hda_codec: no AFG or MFG node found >> [ 640.468730] ALSA alsa-kernel/pci/hda/hda_intel.c:688: hda-intel: >> send_cmd timeout: IRS=0x1, val=0x200f0000 >> [ 640.470038] ALSA >> /home/ipse/packages/alsa-git/alsa-driver/pci/hda/hda_codec.c:783: >> hda_codec: no AFG or MFG node found >> [ 640.471210] ALSA >> /home/ipse/packages/alsa-git/alsa-driver/pci/hda/hda_codec.c:783: >> hda_codec: no AFG or MFG node found >> [ 640.471217] ALSA alsa-kernel/pci/hda/hda_intel.c:1303: hda-intel: >> no codecs initialized >> [ 640.472915] HDA Intel 0000:00:1b.0: PCI INT A disabled >> >> So it looks like codec is not present or is not recognized... >> Is it possible, or my hardware looks like broken? > > The probing control might not be perfect. At least you can try to > enable only one slot at each probe, e.g. probe_mask=1, probe_mask=2, > probe_mask=4, and probe_mask=8. > > If all of these don't work, it should be really a deeper issue. Seems this does not help. What else could I try? -- Regards, Alexander Chemeris. SIPez LLC. SIP VoIP, IM and Presence Consulting http://www.SIPez.com tel: +1 (617) 273-4000 _______________________________________________ Alsa-devel mailing list Alsa-devel@xxxxxxxxxxxxxxxx http://mailman.alsa-project.org/mailman/listinfo/alsa-devel
