This will save some additional power.
Signed-off-by: Mark Brown <broonie@xxxxxxxxxxxxxxxxxxxxxxxxxxx>
---
sound/soc/codecs/wm8903.c | 9 ++++++---
1 files changed, 6 insertions(+), 3 deletions(-)
diff --git a/sound/soc/codecs/wm8903.c b/sound/soc/codecs/wm8903.c
index c80968f..bde7454 100644
--- a/sound/soc/codecs/wm8903.c
+++ b/sound/soc/codecs/wm8903.c
@@ -997,6 +997,9 @@ static int wm8903_set_bias_level(struct snd_soc_codec *codec,
case SND_SOC_BIAS_STANDBY:
if (codec->bias_level == SND_SOC_BIAS_OFF) {
+ wm8903_write(codec, WM8903_CLOCK_RATES_2,
+ WM8903_CLK_SYS_ENA);
+
wm8903_run_sequence(codec, 0);
wm8903_sync_reg_cache(codec, codec->reg_cache);
@@ -1027,6 +1030,9 @@ static int wm8903_set_bias_level(struct snd_soc_codec *codec,
case SND_SOC_BIAS_OFF:
wm8903_run_sequence(codec, 32);
+ reg = wm8903_read(codec, WM8903_CLOCK_RATES_2);
+ reg &= ~WM8903_CLK_SYS_ENA;
+ wm8903_write(codec, WM8903_CLOCK_RATES_2, reg);
break;
}
@@ -1619,9 +1625,6 @@ static int wm8903_i2c_probe(struct i2c_client *i2c,
wm8903_reset(codec);
- /* SYSCLK is required for pretty much anything */
- wm8903_write(codec, WM8903_CLOCK_RATES_2, WM8903_CLK_SYS_ENA);
-
/* power on device */
wm8903_set_bias_level(codec, SND_SOC_BIAS_STANDBY);
--
1.5.6.5
_______________________________________________
Alsa-devel mailing list
Alsa-devel@xxxxxxxxxxxxxxxx
http://mailman.alsa-project.org/mailman/listinfo/alsa-devel
