2008/12/10 Takashi Iwai <tiwai@xxxxxxx>:> At Wed, 10 Dec 2008 11:20:54 +0530,> Manilal K M wrote:>>>> Hello everybody,>> Recently I have installed Fedora 10 on my Compaq CQ45 laptop. But>> unfortunately there was no sound from the laptop speakers even though>> the headphones worked perfectly. I did some google search but it>> didn't helped. Later, on a discussion at #alsa(freenode.net), one of>> the IRC member(nickname: copper) gave some clue and finally found that>> I have to upgrade the alsa driver and pass the model id(dell-m4-1) as>> a parameter in modprobe.conf. Here are the results generated by>> alsa-info.sh before and after upgrading to the latest alsa(1.0.18a).>>>> http://www.alsa-project.org/db/?f=9a29eac2731b3de1c17183d6c43aac3fa11942c9>> http://www.alsa-project.org/db/?f=9a29eac2731b3de1c17183d6c43aac3fa11942c9>>>> The option I have passed to /etc/modprobe.conf/alsa-base is :>> options snd-hda-intel model=dell-m4-1>>>> After reboot, I was able to hear sound from laptop speakers.>> Thanks for reporting.>> Could you try the latest snapshot below and check whether the problem> still exists and model=dell-m4-1 works?> ftp://ftp.kernel.org/pub/linux/kernel/people/tiwai/snapshot/alsa-driver-snapshot.tar.gz>> If the model option is still needed, I'll add the quirk entry.>> Note that you should reboot after changing the model option for> STAC/IDT codec, just to be sure. When a model option is specified,> the driver may override the BIOS setting.>>> thanks,>> Takashi> Thanks for your consideration. Right now I don't have access to mylaptop. I wills surely test it this weekend and let you know thestatus. regards -- Manilal K M : മണിലാല് കെ എം.http://libregeek.blogspot.com_______________________________________________Alsa-devel mailing listAlsa-devel@xxxxxxxxxxxxxxxxxxxx://mailman.alsa-project.org/mailman/listinfo/alsa-devel
