On Tuesday 09 December 2008 11:47:01 ext Mark Brown wrote: > On Tue, Dec 09, 2008 at 08:51:58AM +0200, Peter Ujfalusi wrote: > > As I see: when the twl4030_power_down is called from the > > twl4030_set_bias_level (SND_SOC_BIAS_STANDBY, SND_SOC_BIAS_OFF) it sets > > the codec to power-off state (CODEC_MODE:CODECPDZ = 0), which effectively > > turns off the digital filter, analog section, so basically everything. > > When the CODECPDZ is 0, APGA, DAC, analog output settings have no effect > > (they are powered off) > > Right, that's what I thought. You'll need to fix this in order to use > bypass paths since it will turn off the analogue. Yes, that is true. My plan is (yes I do have one): 1. Proper (at least as close to) implementation for the playback path(s) 2. Proper capture implementation (DAPM, etc) 3. Adding the bypass routes 4. The driver is kind of feature complete -- Péter _______________________________________________ Alsa-devel mailing list Alsa-devel@xxxxxxxxxxxxxxxx http://mailman.alsa-project.org/mailman/listinfo/alsa-devel
