On Tue, Dec 02, 2008 at 01:07:28AM +0200, Grazvydas Ignotas wrote:
> This patch adds controls for capture source controls. When a microphone
> is selected, handlers automatically enable bias power (disable when
> deselected). The patch also adds microphone gain control. Microphone
> and line input recording tested on OMAP3 pandora board.
Hrm. Disabling the gain like this is likely to cause trouble for jack
detect. However, that's not implemented yet so not a problem currently.
> +static int twl4030_get_right_input(struct snd_kcontrol *kcontrol,
> + struct snd_ctl_elem_value *ucontrol)
> +{
> + struct snd_soc_codec *codec = kcontrol->private_data;
> + u8 reg = twl4030_read_reg_cache(codec, TWL4030_REG_ANAMICR);
> +
> + reg &= TWL4030_SUBMIC_EN|TWL4030_AUXR_EN;
> + if (reg == TWL4030_SUBMIC_EN)
> + ucontrol->value.integer.value[0] = 0;
> + else if (reg == TWL4030_AUXR_EN)
> + ucontrol->value.integer.value[0] = 1;
> +
> + return 0;
This will report something undefined as selected when neither option is
selected. Why not include a "None" option in the mux (the same applies
to the other path)? A switch statement might make for clearer code here.
> +
> + SOC_DOUBLE_TLV("Microphone Boost", TWL4030_REG_ANAMIC_GAIN,
> + 0, 3, 5, 0, microphone_gain_tlv),
Should be "Microphone Boost Volume" or possibly just "Microphone Volume".
_______________________________________________
Alsa-devel mailing list
Alsa-devel@xxxxxxxxxxxxxxxx
http://mailman.alsa-project.org/mailman/listinfo/alsa-devel
