Hello, lists. Now I'm porting WM8728 driver with i.MX27ADS, based on Freescale's BSP kernel(2.6.22) and refering to ALSA SoC git repository. I'm connecting the WM8728 to the SSI2 controller via SSI-3 signal set. Then, my ADS board has altered: i.MX27 WM8728 --------------------- SSI3_CLK BCLKIN SSI3_FS LRCIN SSI3_TXDAT DIN TOUT/SSI2_MCLK MCLK Of course, I added some codes to configure GPIO pins as appropriate into board specific sources. Then, I'm trying to play sounds via WM8728 and have not hear any sounds yet. I checked SSI-3 signal set with an oscilloscope, no clock signal appears on SSI3_CLK. I tried the various SSI setting, I2S normal, I2S master, asychronous/synchronous, normal mode/network mode, ... But, I can't see clock signal, yet. I want to know an example setting to act i.MX' SSI as I2S clock master. Regards, -------------- NOGUCHI Hiroshi ngc@xxxxxxxxxx _______________________________________________ Alsa-devel mailing list Alsa-devel@xxxxxxxxxxxxxxxx http://mailman.alsa-project.org/mailman/listinfo/alsa-devel