Hello, I have tried to clean up the changes that I have at the momnent. After the series you will have 'ultimate' control on how the audio is routed to the outputs of TWL. One can select the possible inputs (for the output) on all cahnnels. Also I have added gain (volume) controls, wherever it is possible, but they are working for both channels in case of stereo outputs. I tried to name the controls to match with the output's name, so you can easily tell which pin(s) the control will touch. The capture part is not touched, yet. I have not included the changes regarding to the SND_SOC_DAPM_OUTPUT() things. So you have one (actually two) outputs and you can use the mixer interface to select where the audio actually routed. The next step is to make correct dapm mapping for the TWL, but that will take some time. Please comment, if I'm doing something that I should not. --- Peter Ujfalusi (9): ASoC: TWL4030: Change the Master volume control to TLV ASoC: TWL4030: Add CGAIN volume control ASoC: TWL4030: Add helper function for mux handling. ASoC: TWL4030: Add helper function for output gain controls ASoC: TWL4030: Add PreDriv outupt mux and volume controls ASoC: TWL4030: Add Headset outupt mux and volume controls ASoC: TWL4030: Add Carkit outupt mux and volume controls ASoC: TWL4030: Add Hands-free outupt mux control ASoC: TWL4030: Add Earpiece outupt mux and volume controls sound/soc/codecs/twl4030.c | 298 +++++++++++++++++++++++++++++++++++++++++++- 1 files changed, 296 insertions(+), 2 deletions(-) _______________________________________________ Alsa-devel mailing list Alsa-devel@xxxxxxxxxxxxxxxx http://mailman.alsa-project.org/mailman/listinfo/alsa-devel
