Hi All, Is there anybody out there who can help me to answer the following questions: I have converted an application called Linrad ( http://www.nitehawk.com/sm5bsz/linuxdsp/linrad.htm ) from OSS to ALSA. Linrad is a remarkable DSP application used worldwide by many radio-hams. I am facing hereby a problem with a "short read" : An ALSA device is opened in blocking mode: ********************************************* err=snd_pcm_open(&rx_ad_handle, rx_sndin_plughw_pcm_name, SND_PCM_STREAM_CAPTURE, 0); ********************************************* When I subsequently read the device with following statement I sometimes get a "short read": ******************************************** err=snd_pcm_readi(rx_ad_handle,rxin_isho, rxad.block_frames); if((unsigned int)err != rxad.block_frames) { if(err == -EPIPE) // EPIPE, try recovery { err= snd_pcm_recover(rx_ad_handle, err, 0); if(err < 0)lirerr(1108); // recovery failed } else { if(err < 0) { lirerr(1113); // catch all } else { lirerr(1116); // short read } } } } ************************************************** Here are my questions: 1. How is it possible to get a "short read" in blocking mode ? I would think that in blocking mode the control is only returned after the read is completed. 2. What are the possible causes for a "short read" ? 3. What can be done to avoid a "short read" ? 4. How am I supposed to recover from a "short read"? Best regards, Pierre Vanhoucke/ ON5GN _______________________________________________ Alsa-devel mailing list Alsa-devel@xxxxxxxxxxxxxxxx http://mailman.alsa-project.org/mailman/listinfo/alsa-devel
